Aperion Audio Intimus 6-LCR In-Wall Speakers

Elipson, a French audio specialist, has expanded its Elipson Infinite range of cinema speakers with the introduction of two new in-ceiling models: the Elipson Infinite INF6 and Elipson Infinite INF8. These speakers are designed for seamless integration into home theater setups, particularly for reproducing advanced audio formats like Dolby Atmos, DTS:X, or Auro 3D. They combine the robust technologies characteristic of the Infinite range with a discreet, ceiling-mountable form factor. The existing Elipson Infinite series already includes the Elipson Infinite 8 and Elipson Infinite 14 speakers, which are versatile enough for wall mounting or integration into partitions. These models can serve as front, center, surround, and even Atmos speakers, offering direct sound diffusion, including through acoustically transparent projection screens. The range also features the Elipson Infinite S12 passive subwoofer, designed for wall-mounting or partition integration, and ideally paired with the Elipson Infinite A1000 power amplifier, which delivers 1000 watts into 4 ohms. The addition of the INF6 and INF8 models provides an even more integrated solution, ensuring that sound effects can be optimally distributed from the ceiling without visible speaker enclosures. A key design element across the Elipson Infinite series is the focus on exceptional power handling, crucial for rendering the dynamic soundtracks of movies and series. Elipson addresses this by utilizing a unique cone material for its midbass drivers. This cone is crafted from carbon fibers combined with polymethylacrylamide (PDMA) foam, a blend chosen for its optimal balance of lightness and rigidity. This construction maximizes power handling, allowing for significantly higher sound levels while maintaining precise control and clarity. The midbass driver sizes vary slightly across the range: 6.7 inches for the Infinite 8 and Infinite 14, 6.2 inches for the Infinite INF6, and 7.9 inches for the Infinite INF8. The consistent use of this composite driver material across all speakers in the range ensures excellent tonal coherence, a vital aspect for an immersive home theater experience. Further enhancing the speakers' performance is an improved tweeter design. The Elipson Infinite 8 and Infinite 14 feature a 1-inch ring-type tweeter capable of handling high power and reaching very high frequencies. For the new in-ceiling INF6 and INF8 models, Elipson has developed a new titanium dome tweeter. The INF6 uses a 0.75-inch tweeter, while the INF8 features a 1-inch version. A notable feature of these new tweeters is their adjustability; they can be oriented up to 30 degrees in any direction. This adjustability is critical for directing sound effects accurately, ensuring optimal propagation and a tailored audio experience regardless of the speaker's specific placement within the room. This flexibility allows for precise sound staging and an immersive auditory environment, completing Elipson's vision for a fully integrated, high-performance private cinema setup where all audio components blend seamlessly into the room's architecture. #Elipson #HomeTheater #InCeilingSpeakers #DolbyAtmos #DTSX #Auro3D #AudioTechnology #SpeakerDesign #SoundQuality

The James by Sonance SA68 represents a significant advancement in architectural audio solutions, serving as the flagship model in the brand's Small Aperture series of in-wall and in-ceiling speakers. Its design philosophy centers on integrating high-performance audio seamlessly into living spaces while maintaining a minimalist visual presence. The core innovation lies in its ability to conceal the speaker's main components within the wall or ceiling, leaving only a small, discreet grille visible, thus addressing the common challenge of balancing powerful sound output with aesthetic integrity in modern home design. Small aperture speakers are specifically engineered to produce robust sound despite having a reduced driver assembly size. This allows for minimal visible openings, typically ranging from 3 to 8.5 inches, through which sound projects into the room. This design is particularly beneficial for installations where traditional, larger speakers would be visually intrusive or impractical. The James Small Aperture series, and specifically the SA68, leverages proprietary woofer and driver technologies to achieve this, promising premium audio performance from a nearly invisible source. The SA68 is the culmination of advancements, building on previous models, and benefiting from Sonance's 2019 acquisition of James Loudspeaker, which expanded its reach into the luxury custom installation market. Engineered to exceed acoustic expectations without compromising its discreet appearance, the SA68 features an integrated 6.5-inch ultra-high-fidelity woofer and a 2-inch full-range module. Both components are constructed from exclusive thin ply carbon material, a choice typically reserved for high-end engineering applications due to its strength and optimal weight. This material choice allows the SA68 to produce deeper, more impactful bass and articulate, natural sound across the entire frequency range, marking a notable improvement over its predecessor, the SA63. The use of thin ply carbon ensures precise sound reproduction by providing stronger and more controlled drivers while maintaining optimal weight and geometry. Beyond its acoustic capabilities, the SA68 boasts marine-grade construction standards, encased within an aircraft-grade aluminum enclosure, ensuring exceptional durability and reliability. It also incorporates CDX Crossover technology, designed to deliver broad and uniform sound coverage throughout the listening area. Customization options are extensive, allowing for seamless integration into diverse interior aesthetics. Customers can choose from 3-inch or 4-inch round or square grilles, available in eight standard finishes at no extra cost. Further customization includes center and offset opening modifications, module spacers, various grille sizes and trims, 70/100 Volt compatibility for commercial applications, and additional marine-grade enhancements for challenging environments. A direct comparison with the SA63-8 highlights the SA68's advancements. While both are small aperture in-wall/ceiling speakers with aircraft-grade aluminum enclosures, the SA68 features a 6.5-inch thin ply carbon fiber/Rohacell cone woofer and a 2-inch thin ply carbon fiber cone for midrange/tweeter, contrasting with the SA63-8's aluminum components. The SA68 offers a frequency response of 45Hz-25kHz ±3dB, an 8-ohm nominal impedance, and 82dB SPL sensitivity, with a recommended amplifier power of 5W to 150W. Its required mounting depth is 7 inches, slightly less than the SA63-8's 8 inches, and it weighs 22 lbs. The SA68 represents a solution for achieving high-quality audio in environments where speakers need to be heard but not seen, catering to discerning users who prioritize both sound quality and interior aesthetics. Price and availability information for individual units are communicated through authorized dealers and installers. #InWallSpeakers #ArchitecturalSpeakers #SmallApertureSpeakers #HomeAudio #Sonance #JamesLoudspeaker #HighFidelity #HomeTheater #CustomInstallation

L-Acoustics has expanded its presence in the premium home and yacht markets by introducing in-wall versions of its Soka, X4i loudspeakers, and SB6i and SB10i subwoofers. These new in-wall designs cater to home cinemas, media rooms, and bespoke entertaining areas, adapting technologies from L-Acoustics' professional audio loudspeakers, such as colinear array driver configuration and coaxial mid/HF drivers, which are well-suited for in-wall installations due to their controlled and predictable dispersion patterns. The compact cabinets of the Soka and X4i models were chosen for their flexibility in integration and interior design. The Soka and X4i models are particularly suitable for in-wall installation because all acoustic energy is projected forwards into the room, eliminating rear venting. Their sealed cabinet design ensures consistent sound output, balance, and maximum SPL, regardless of wall construction, cavity volume, or damping. This design significantly reduces sound energy transmission into adjacent rooms compared to open-backed or non-sealed in-wall speakers. Installing speakers flush to a wall offers advantages, notably the 'boundary gain' effect, where sound waves reflect off the wall and reinforce direct sound, leading to a potential increase of up to +6 dB in sound pressure level at low frequencies. This boost in bass response can be desirable and must be factored into the design phase, although it can interact with room modes, necessitating further acoustic treatment or equalization. Traditional in-wall speakers often include switchable filters in their crossover electronics to attenuate low frequencies, a method that can be imprecise. However, with the advent of modern DSP Room-EQ processing, onboard boundary gain compensation filters are becoming redundant for premium installations. L-Acoustics has opted not to include these bass compensation filters in their in-wall loudspeakers. Instead, potential boundary gain is measured and adjusted using dedicated speaker presets on their amplified controllers. These controllers offer DSP capabilities and algorithms that allow integrators to optimize the frequency response curve during post-installation calibration. Driver technology and configuration are critical for in-wall loudspeaker performance. Traditional two-way speakers with separate bass/mid drivers and tweeters often suffer from phase and time incoherence due to distinct dispersion patterns. Coaxial loudspeaker drivers, with the tweeter mounted centrally within the mid/bass unit, provide genuinely spherical dispersion and time-aligned wavefronts, simplifying DSP EQ and offering a more coherent sound with improved imaging. The X4i, known for its coaxial driver benefits, now incorporates these advantages in the new X4r in-wall variant. The Soka model utilizes a colinear driver array, a technology derived from L-Acoustics' line-array systems for large venues. This system, combined with the DOSC waveguide, offers enhanced control over directivity and forward energy projection, reducing reflections from the baffle wall and ensuring consistent sound irrespective of the wall's cosmetic finish. Physical considerations are equally important. Main installation speakers are designed to be approximately 100mm deep and no more than 400mm wide to fit within standard construction frameworks. The X4i and Soka models meet these dimensions, making them ideal for reengineering into in-wall variants. An acoustic seal is formed against the wall by the front grille to prevent sound propagation backward. Installation is simplified with included templates and rigging kits for various mounting options. Advanced modeling software like Soundvision allows integrators to import room drawings and virtually place loudspeakers to validate acoustic results before installation, ensuring optimal speaker placement. For ultimate performance, L-Acoustics provides an acoustic measurement solution, including Network Manager software and the P1 AVB processor platform, for EQ optimization and validation. These advancements underscore the sophistication of modern in-wall loudspeakers, transforming them into highly innovative devices backed by cutting-edge software, crucial for delivering premium sound in high-end audio integration projects. #LoudspeakerDesign #InWallSpeakers #AcousticEngineering #HomeCinema #SmartHomeAudio #AudioIntegration #DSPProcessing #CoaxialDrivers #ColinearArray #SoundvisionSoftware

This article previews the Pro Audio SCRS-6c-iw, a new in-wall or in-ceiling speaker designed to integrate into modern home theater systems, particularly those supporting Dolby Atmos or DTS:X immersive audio formats. The speaker aims to provide a dynamic audio experience for both surround sound setups and distributed audio applications. Priced at approximately $1000 per unit, this speaker positions Pro Audio as a significant player in the premium architectural speaker market. The SCRS-6c-iw features a compact design, measuring 8 inches square with a shallow depth of 3.9 inches. This minimal depth is a crucial aspect, allowing the speaker to fit within standard 2x4 stud construction walls, which is a common limitation for in-wall speakers. The design utilizes a shared magnet structure for its components: a 6-inch high-output woofer and a 1-inch compression driver coaxially mounted on a concentric horn. This engineering choice helps reduce the overall depth of the speaker while maintaining performance. Pro Audio specifies impressive sensitivity ratings for the SCRS-6c-iw, with 93dB for the woofer and 103dB for the compression tweeter at 1 watt input. These high sensitivities suggest that the speaker can produce significant sound output with relatively modest amplification. The speaker also includes a passive crossover network, enabling it to be driven by a single amplifier channel, simplifying installation and system configuration. The manufacturer highlights the speaker's versatility, suggesting its suitability for both dedicated media rooms and multi-use spaces where immersive audio is desired. Paul Hales, President of Pro Audio Technology, emphasizes the SCRS-6c-iw's ability to deliver rich, full sound in rooms of varying sizes despite its compact form factor. The speaker is also noted for its wide 100-degree sound dispersion pattern, making it effective for distributed audio applications where fewer speakers are needed to cover large areas. While the SCRS-6c-iw offers high sensitivity and a compact design, the article advises that its low-frequency bandwidth may be somewhat limited due to these design choices. Therefore, for optimal performance, especially in a home theater context, the use of a dedicated subwoofer is recommended to complement the speaker's output and provide a full-range audio experience. The speaker requires amplification via a PRO DSP amplifier, with power recommendations ranging from 100W to 300W. Its frequency range is stated as 125Hz to 23kHz. The SCRS-6c-iw is available through authorized Pro Audio Technology resellers in the US. This preview article indicates that while a formal review may follow, the initial impression suggests a promising option for consumers looking for high-performance, aesthetically integrated speaker solutions for their home audio systems. #InWallSpeakers #InCeilingSpeakers #DolbyAtmos #DTSX #HomeTheater #ArchitecturalSpeakers #AudioTechnology #SpeakerPreview #HighSensitivity

The RBH Sound SI-615 Signature Series in-ceiling speakers, accompanied by their backboxes, are presented as a transformative solution for updating home reference systems to immersive surround sound, specifically a 7.5.4 configuration. These speakers are part of RBH Sound's Signature in-wall line, designed to deliver high-quality audio performance without the physical footprint of traditional floorstanding speakers. The SI-615 features a 6-1/2 inch aluminum cone woofer and a ¾-inch pivoting ring-radiator tweeter, boasting a sensitivity rating of 88dB (2.83V @ 1 meter) and a bass extension down to 50Hz (-3dB, free air). The article highlights that the SI-615 is primarily intended for in-ceiling channels in object-based surround sound systems, like Dolby Atmos, but can also serve in high-end stereo listening or whole-house audio setups. The review focuses on installing two pairs of SI-615s with matching BC-6R insulated backcans as height channels, emphasizing RBH Sound's commitment to acoustic science over marketing by not producing 'bouncy house speakers.' The installation process is described as straightforward, involving attaching the SI-615 to the BC-6R backcan. Alternative shallower backcans (BC-6S) or foam backboxes (FB-6C) are mentioned for installations with limited space, with a strong recommendation to use one of these options to provide a controlled acoustical environment, which is crucial for optimal performance and may also be a safety requirement in some areas. Installation tips include using the provided cardboard template for cutting the ceiling hole, connecting speaker wires before mounting, and being careful not to overtighten the clamps. A notable feature is the magnetic grilles, which can be painted to match the ceiling, offering a visually discreet integration. It is advised to remove the cloth lining inside the grille for optimal high-frequency performance. Speaker placement and setup are discussed in detail, with the reviewer aiming for optimal coverage for two rows of seating, aligning with Dolby's recommendations for height channel angles and spacing. The article also touches upon the pivoting tweeter, noting that in the reviewer's setup, it was left in the default position as broader coverage was preferred for height channels. However, for installations with more extreme angles, the VA-615 model with a fixed 15-degree offset woofer is suggested. The review includes a technical measurement section, where the SI-615's impedance is analyzed, revealing it to be rated at 8 ohms but measuring slightly lower at very high frequencies, indicating the use of a 4-ohm tweeter to enhance system sensitivity. The phase angle is deemed benign, and the speakers are considered an easy load for most receivers. The impact of the backcan on system resonance is also discussed, showing a shift from 45Hz to just under 100Hz, a trade-off for improved isolation. A smoothed frequency response measurement indicates the speaker's performance in an in-room setting. Listening tests, conducted with a Yamaha CX-A5100 Atmos processor and MX-A5000 amplifier, involved evaluating the speakers with the Dolby Atmos August 2014 Demo disc and various movies. The reviewer initially found the elevation effect subtle but observed a significant improvement in immersion and directional cues after switching side channels from bi-poles to monopoles, confirming Dolby's recommendation for immersive surround sound setups. The SI-615s are praised for their tonal consistency with other RBH Signature series products and their ability to create a seamless, enveloping soundstage, even with upmixed 5.1 content through the Dolby Surround Upmixer. The article concludes by highlighting the SI-615s as a capable in-ceiling speaker choice for Atmos, praising their sonics, ease of installation, and magnetic grilles. The primary drawback noted is the price of $525 per speaker, which positions them as a premium option for height effects compared to Atmos-enabled reflection speakers, but justifies the cost for those seeking a significant upgrade in sound quality within a discrete immersive surround system. #RBHSI615 #InCeilingSpeakers #DolbyAtmos #HomeTheater #SurroundSound #SpeakerReview #CustomIntegration #Audioholics #HomeAudio

Architectural speakers, including in-wall and in-ceiling models, have evolved significantly, moving beyond the perception of being a compromise in audio quality. These speakers are now capable of delivering high-fidelity sound comparable to, or even surpassing, traditional freestanding models, especially following advancements spurred by the COVID-19 pandemic. Many manufacturers have expanded their architectural lineups, incorporating high-end drivers and technology from their premium bookshelf and floorstanding speaker lines. For applications like Dolby Atmos, in-ceiling speakers are considered the optimal solution for height effects, not a compromise. Selecting the right architectural speaker involves more than just reviewing specifications; factors like placement, room construction, listening objectives, and system integration are crucial. Therefore, professional installation by a qualified custom integrator is often recommended to ensure proper wiring, correct installation, and optimal system calibration. The article emphasizes the benefit of in-ceiling models with larger woofers for a fuller, richer sound and more convincing bass, particularly in distributed audio systems where a dedicated subwoofer might not be included. Several leading brands and models are highlighted for their exceptional performance. Monitor Audio's Creator Series, for instance, has undergone a complete revamp, featuring Rigid Surface Technology II drivers from their Silver 7G lineup. The Tier 2 and Tier 3 speakers offer remarkable detail, with larger models now incorporating 9-inch woofers in the footprint of an 8-inch design. Origin Acoustics Director Series is praised for ease of installation and excellent sound across a broad range, from compact 3-inch speakers to the 10-inch D109, capable of reaching 25Hz. Revel PerformaBe Architectural series incorporates beryllium tweeters for outstanding detail, sharing technology with Revel's acclaimed PerformaBe line. JBL Synthesis speakers are noted for bringing cinema-quality sound to home theaters, utilizing compression tweeters and High-Definition Imaging (HDI) horns for dynamic, high-SPL performance. Their modular design allows for integration with other Synthesis models. Theory Audio Design stands out for its "best-only" philosophy, offering three high-output models (iw25, ic5, ic6) designed to play loudly without sonic degradation, typically paired with their DLC Amplified Loudspeaker Controller for optimal performance. The ic6, a versatile point-source coaxial design, delivers impressive fullness and dynamic range for its size. For more practical, whole-house audio, the Triad TS-IC83 is presented as a strong choice due to its balance of price and performance. It features an 8-inch woven carbon-fiber woofer and a pivoting 1-inch silk-dome tweeter, offering good low-end weight and customizable aesthetics. Canvas HiFi's Solo is highlighted as an all-in-one on-wall wireless speaker system providing rich, dynamic, full-range sound down to 30Hz without needing a subwoofer, featuring interchangeable grilles for seamless integration. In the subwoofer category, the SVS 3000 In-wall Subwoofer is recognized as a high-performing option for those needing a discreet solution, offering massive low-end from dual 9-inch drivers. The JL Audio Fathom IWS is presented as a premium in-wall subwoofer, delivering true in-room performance from a 13.5-inch driver, though it requires significant installation effort. These architectural speakers and subwoofers demonstrate that hidden audio solutions can provide reference-level performance for both dedicated home theaters and whole-home audio systems when properly selected and installed. #ArchitecturalSpeakers #InWallSpeakers #InCeilingSpeakers #HomeTheater #WholeHomeAudio #Subwoofers #DolbyAtmos #AudioIntegration #HiFi

This article provides a comprehensive exploration of in-wall speakers, contrasting them with traditional in-room speakers, assuming comparable quality and pricing. The discussion begins by challenging the common negative perception that all in-wall speakers are of poor quality. It acknowledges that while many inexpensive, open-back in-wall speakers on the market historically have contributed to this perception due to their lightweight construction and lack of proper enclosure, there is a significant category of high-quality in-wall speakers that offer distinct advantages when designed and installed correctly. The article delves into the historical context, citing an anecdote from thirty-five years ago where automotive speakers were repurposed for in-wall residential installations due to the lack of suitable custom options. This historical perspective highlights the long-standing demand for aesthetically discreet audio solutions in affluent and stylish homes. It notes that while initial in-wall speakers often compromised on sound quality for aesthetics, the market has evolved to offer much better options today. A critical distinction is made between cheap, open-back in-wall speakers and properly engineered enclosed designs. The former, often lacking an enclosure and ignoring crucial electro-mechanical parameters like Thiele-Small, suffer from issues such as sound bleeding into adjacent rooms and unpredictable, often poor, bass performance. The article also addresses the inadequacy of most 'back boxes' offered by some manufacturers, explaining that these are often flimsy, not acoustically designed for optimal bass, and primarily serve for isolation rather than sound improvement. A properly designed in-wall speaker, by contrast, incorporates quality drivers, a suitable crossover network, and a braced enclosure, much like a freestanding speaker. The disadvantages of in-wall speakers are meticulously outlined. These include greater difficulty in upgrading or relocating them due to the need for sheetrock and paint work, emphasizing the importance of careful initial placement. Another drawback is their fixed position, which prevents toe-in adjustments that can optimize sound. Additionally, being installed in a wall means they are further from the listener, leading to a perception of lower loudness and a higher percentage of reflected sound, though these issues can be mitigated with acoustic treatments and volume adjustments. Conversely, the advantages of in-wall speakers are highlighted. They offer a cleaner aesthetic, being far less intrusive than traditional box speakers, which can be a significant factor in home décor and family acceptance. When mounted in a wall, they can eliminate certain wall reflections that cause uneven bass and lower midrange response in freestanding speakers, thanks to the wall acting as a baffle. This bafflement effect also results in a 6 dB increase in bass, which, when combined with modern auto-EQ systems in receivers, can lead to greater headroom and reduced distortion. In-wall speakers are also particularly beneficial for home theaters using acoustically transparent screens, allowing for proper center channel placement without pushing the screen far into the room. They are also ideal for surround sound applications, minimizing trip hazards and offering various radiating patterns like direct-radiating, dipole, and bipole options suitable for modern immersive audio formats. The article concludes by asserting that while cheap in-walls exist, many excellent enclosed in-wall speakers can rival freestanding speakers at similar price points, making them a viable and often superior choice for specific applications where aesthetics, space, or other practical considerations are paramount. #InWallSpeakers #LoudspeakerDesign #HomeTheater #AudioTechnology #Acoustics #HomeAudio #SpeakerInstallation #RoomAcoustics #CustomInstallation

Integrating speakers into home decor seamlessly requires careful consideration of various factors, according to Janna Robinson, Techorator and founder of JannaRobinson.com. Before purchasing any sound system, it is crucial to think about the purpose, placement, and wiring to make informed decisions for each room. The market offers a wide array of speaker options in different shapes, sizes, types, and colors, necessitating a thoughtful approach to selection. Robinson emphasizes that the type of sound system should align with the specific function of each area in the house. For immersive home theater experiences or relaxing music in a den, she recommends seeking a dedicated and sleek soundbar with wireless multi-room audio. These compact options provide significant sound without occupying excessive space. For tasks like cooking, where listening to music or streaming recipes is desired, a single, accommodating speaker is suggested. The decision between installed or free-standing speakers often depends on property ownership. Installed speakers, such as in-wall, in-ceiling, architectural, or invisible speakers, are best suited for homeowners undertaking new builds or renovations, as they are designed to disappear into the structure. This permanent integration allows for customized aesthetics and creative placement, with smart technology enabling control via personal devices. Audiophiles, however, often prefer free-standing speakers, some of which resemble works of art, with compact bookshelf speakers being a popular choice due to their quality sound and portability. These can be moved between rooms, adapting to various spaces. To integrate speakers into diverse home decor styles, whether bohemian or ultra-modern, Robinson provides several creative solutions. These include using decorative speaker grille fabrics, preferably acoustically-treated material, or paint-matching grille covers to blend with wall colors. Speakers can also be strategically placed behind large accessories, vases, or stacks of books, or grouped with other objects to make them less conspicuous. Specialized custom speaker boxes offer additional concealment options. Utilizing unused cabinet space, ensuring any covering material is perforated for sound passage, and incorporating plants larger than the speakers are other effective methods. Subwoofers can be hidden behind furniture, such as occasional chairs. The acoustic balance within a room significantly impacts sound quality. Rooms with abundant furniture, heavy curtains, rugs, and other plush surfaces can result in dark and dampened sound. To counteract this, Robinson suggests adding reflective surfaces like framed artwork, books, or picture frames to brighten the sound, ideal for intimate listening areas like studies or libraries. Conversely, modern homes with many reflective surfaces—windows, exposed floors, open floor plans, framed artwork, or glass/wood coffee tables—benefit from incorporating sound-absorbing elements. Upholstered pieces, soft window coverings, acoustic panels, area rugs, throw pillows, and throws can help absorb sound, ensuring that the chosen speaker setup delivers the best possible audio experience. #SpeakerIntegration #HomeDecor #InteriorDesign #AudioSystem #SmartHome #AcousticDesign #EntertainmentSystem #HomeImprovement #TechInDecor

Axiom Audio, a company with 30 years of experience in high-fidelity loudspeakers and home theater surround-sound systems, has introduced a new series of decor-friendly on-wall speakers. This new lineup includes the On-Wall M0, M2, M3, and M22, along with the On-Wall VP100 and VP150 center channels. These speakers are designed to save floor space and offer an unobtrusive appearance, making them suitable for modern living spaces, particularly alongside flat-panel plasma and LCD displays. The M0, M2, M3, and M22 on-wall speakers utilize Axiom's innovative Power Bracket mounting system. This system simplifies installation by allowing users to slide the speakers into place, automatically connecting them to the speaker cables. This eliminates the need for complex wiring manipulations during setup. The Power Bracket is designed for ease of use, ensuring that the speakers are properly mounted and connected in a single, straightforward step. The M0 is currently available, with the M2, M3, and M22 scheduled for production in May. For the center channel units, the On-Wall VP100 and VP150, Axiom provides a sturdy steel T-bracket. This bracket enables these speakers to be mounted flush against the wall surface, further contributing to their seamless integration with home decor. The ability to position these speakers ideally on either side of a flat-screen TV enhances the stereo soundstage, creating a more cohesive audio-visual experience. The new on-wall speaker series offers a range of models that correspond to Axiom's popular bookshelf speakers, maintaining the same model numbers. The pricing for the on-wall models is identical to their standard bookshelf counterparts. For example, the On-Wall M2 is priced at $296 US per pair ($305 CAD), which includes shipping. Customers also have the option to choose special real-wood veneers and paintable finishes at an additional cost. Ian Colquhoun, Axiom's president and founder, highlighted the benefits of the new on-wall series, emphasizing convenience and aesthetic appeal for rooms where in-wall installations are not feasible or desired. A key aspect of the design is the acoustic adjustment made to account for the boundary effect of the wall behind the speaker. This contrasts with bookshelf speakers, where such adjustments are typically not possible due to varying installation environments. This design consideration ensures that the on-wall speakers maintain Axiom's characteristic neutral, uncolored sound quality, with transparent highs and a natural midrange. The introduction of these on-wall speakers addresses the growing demand for audio solutions that complement contemporary home aesthetics without compromising sound performance. By offering a blend of easy installation, aesthetic integration, and acoustically optimized design, Axiom aims to provide versatile options for consumers seeking high-quality audio in a visually appealing format. #AxiomAudio #OnWallSpeakers #HomeTheater #Loudspeakers #SpeakerMounting #AudioTechnology #HomeAudio #SoundQuality

This comprehensive guide explores the best wall mount speakers available in January 2026, offering a blend of superior sound quality and space-saving design for audiophiles, movie enthusiasts, and music lovers. Wall-mounted speakers are presented as a valuable investment that enhances both audio experience and room aesthetics. The article begins by highlighting two top picks for those short on time: the Bose 251 Environmental Outdoor/Indoor Speakers, lauded for their balanced stereo sound over wide areas and outdoor resilience, and the JBL C1PRO-WH Professional Compact Loudspeaker System, praised for its versatility, robustness, and quality sound delivery in a compact form factor. The buyer's guide section details crucial factors for selecting wall mount speakers. Sound quality considerations include frequency response for sound reproduction range, sensitivity (dB) for loudness, and power handling (watts) for compatibility with amplifiers. Size and design emphasize matching speaker dimensions to the available space and selecting an aesthetic that complements room decor. Different types of speakers are outlined, such as surround sound speakers for home theaters, versatile bookshelf speakers for music, and specialized outdoor speakers designed for weather resistance. Connectivity options cover wired versus wireless setups, and Bluetooth/Wi-Fi compatibility for wireless models. Installation and placement are also addressed, stressing the importance of reliable mounting systems, considering speaker weight, wall strength, and following manufacturer guidelines for optimal sound. Finally, durability and brand reputation are highlighted, recommending durable materials, weather-resistant features for outdoor use, and researching brands for quality, customer service, and warranty. The article then delves into six specific models, providing detailed descriptions, pros, and cons for each. The Bose 251 Environmental Outdoor/Indoor Speakers are again featured as the 'Author's Choice', recognized for wide sound coverage, weather resistance, high-quality bass, and elegant design. The JBL C1PRO-WH Professional Compact Loudspeaker System is presented as 'Best Overall', noted for its compact size, versatility, overload protection, flexible mounting, and magnetic shielding. The Klipsch AW-650 Indoor/Outdoor Speaker is the 'People's Choice', offering robust sound, all-weather durability, and easy installation for various environments. For budget-conscious buyers, the Polk Audio T15 Speakers are recommended as 'Best Budget', providing versatile usage, quality sound, and an affordable, space-saving design suitable for home theater setups. The Polk Audio Signa S4 Ultra-Slim Sound Bar is the 'Best Alternative', featuring immersive 3D surround sound with Dolby Atmos, customizable audio, a sleek design, and versatile connectivity. Lastly, the Klipsch R-5800-W II In-Wall Speakers are designated 'Best in Wall', known for high-quality sound, reduced distortion, adjustable sound direction, and aesthetic design for seamless integration. A comparison table summarizes key features like speaker type, connectivity technology, and special features for each of the six models. The article concludes by addressing frequently asked questions, clarifying that wall mount speakers are suitable for both music and movies, installation can vary from DIY to professional, frequency range is vital for sound quality, outdoor speakers must be specifically designed for weather, and optimal placement is generally at ear level and equidistant from the listening position. The overarching conclusion is that the ideal wall-mounted speaker depends on individual requirements for sound quality, design, functionality, and budget, with a suitable product available for every criterion. #WallMountSpeakers #HomeAudio #SpeakerSystem #SoundQuality #HomeTheater #OutdoorSpeakers #AudioEquipment #SpeakerInstallation #TechReview

Pioneer Electronics (USA) Inc. has launched a new Elite architectural speaker line, now available nationwide through authorized dealers. These speakers are specifically designed to provide a high-performance audio solution for the custom installation market, offering advanced technology and flexible integration features suitable for various home theater projects. The new line aims to deliver premier reproduction of high-resolution soundtracks, perfectly matching Pioneer’s existing home theater products to faithfully recreate the intended emotional response of directors and sound engineers. According to Andrew Jones, chief speaker designer for Pioneer Electronics (USA) Inc., the company's long-standing goal of bringing high-quality music entertainment into homes is upheld by these new Elite architectural speakers, which promise ultimate home theater performance when integrated with other Pioneer products. The development of these speakers draws on technological and design innovations from Pioneer's professional Technical Audio Devices (TAD) speakers and award-winning EX Series speaker products. The new lineup includes six models designed to enhance the entertainment experience, allowing enthusiasts to connect more deeply with the artistic vision behind Hollywood productions. These speakers are crafted to sonically reproduce the integrity of today’s lossless audio formats, capturing subtle details in music CDs and dynamic explosions in action films. The Elite line is ideal for high-performance home theater and high-fidelity multi-room audio applications. Professional installers can choose from three in-wall speakers, two angled in-ceiling models, and a 3-way left/center/right option, providing versatile solutions for demanding installations. These speakers can be used together to create full 5- or 7-channel, high-performance systems that are completely in-ceiling and nearly invisible. Jones and his team focused critically on build quality, independently researching and selecting components to construct a distinctive line of architectural speakers that surpass current industry standards. The speakers feature advanced materials such as titanium tweeters, woven aramid fiber woofers, and cast aluminum chassis, enabling stellar audio reproduction capabilities that exceed those of similar products on the market. A key technological advancement in this series is Pioneer’s proprietary Coherent Source Transducer (CST) technology. This innovation improves off-axis performance and ensures a smoother, more accurate frequency response, effectively expanding a room's “sweet spot.” CST technology offers uniform listening and serves as a high-end alternative to existing pivoting driver designs. Pioneer aims to solidify its position as a leading home entertainment manufacturer by offering a complete audio and video system solution that rivals the cinema experience. With its comprehensive product line, including Blu-ray Disc players, A/V receivers, flat-panel displays, and now architectural speakers, Pioneer enhances modern homes with synergistic products that work in concert to immerse consumers in advanced home entertainment technology. When purchased from an authorized retailer, Pioneer and Elite in-wall/in-ceiling speaker products come with a limited five-year warranty, while Pioneer and Elite powered subwoofer products include a three-year warranty. #PioneerElectronics #EliteSpeakers #ArchitecturalSpeakers #HomeTheater #InWallSpeakers #InCeilingSpeakers #HighPerformanceAudio #CSTTechnology #AudioInstallation

This article highlights the benefits and applications of ceiling-mounted speakers, emphasizing their ability to deliver significant sonic impact with minimal visual presence. It serves as a comprehensive guide for individuals looking to integrate high-quality audio into their homes, whether for dedicated home theaters, surround-sound systems, or whole-home audio solutions. The piece begins by establishing the primary appeal of ceiling speakers: they are heard, not seen, catering to a modern aesthetic where large, visible loudspeakers are less favored. The author, Jack Baruth, a seasoned expert in traditional wired home theaters, details his criteria for selecting the best ceiling speakers, which include a wide range of performance, price, and size options from reputable manufacturers. Key considerations when choosing ceiling speakers are thoroughly discussed, starting with size and depth. A fundamental principle highlighted is that a larger speaker is generally superior, provided the amplifier is capable, because bigger speakers move more air, reducing distortion and enhancing sound sharpness for movies and music. However, this comes with the practical constraint of requiring more installation space in the ceiling, both for the speaker enclosure and its magnet. Readers are advised to measure available space carefully. The article then addresses compatibility with advanced audio systems like Dolby Atmos and DTS-X, noting that these systems inherently require ceiling-mounted speakers. For these setups, professional advice on placement and sizing relative to other speakers is recommended. For general applications, a useful guideline is provided: ceiling speakers should not be larger than half the size of the main front speakers to maintain sound balance. The discussion extends to whole-home sound systems, explaining that many such speakers are 'stereo-input,' combining left and right channels into a single output, and some can even be 'aimed' to optimize sound direction. For whole-home systems, the article advises selecting the largest, most power-capable speakers that the amplifier or receiver can support to ensure adequate sound coverage throughout a room. The evaluation process for the recommended speakers involved assessing various models for their suitability across different applications and user needs, prioritizing those from manufacturers with a strong reputation for excellence in speaker construction. The article then presents a curated list of nine top ceiling speakers, each with a brief description, pros, cons, and key specifications such as tweeter and woofer size, and other unique features. Examples include the Focal Littora 1000 ICW10 for best overall performance, noted for its no-compromise sound and IP65 waterproof rating, making it suitable for high-end installations. The Klipsch CDT-5800-C-II is recommended as an affordable whole-home option, praised for its high quality and easy configuration, despite its pivoting speaker not being able to aim straight down. The Definitive Technology Ueua/Di 6.5R is highlighted for its efficiency, loudness, and clarity, requiring a relatively powerful amplifier. The Pyle Pair 6.5-Inch Flush Mount offers good value, capable of handling significant power and durable materials, though not meeting audiophile standards. The Focal 100ICW8 is a multi-functional speaker known for clear, sharp sound, blurring the line between home-theater and audiophile quality. The Soundavo SD-6S-ALU is suggested for integrated systems due to its low profile and good value. The Pure Resonance Audio VCA8 is ideal for dropped ceilings, offering simple installation and broad sound dispersal. The ELAC DT61 is best for 7.1.2 applications, designed specifically for home theater use with angled, adjustable drivers. Finally, the JBL Professional C67HC/T stands out for its unique pendant design, suitable for high ceilings and offering both aesthetic appeal and high-fidelity sound. The piece concludes with an expert Q&A section, addressing common questions about amplifiers, receivers, buying speakers individually versus as a set, and future-proofing audio system purchases, advocating for wired systems for longevity. #CeilingSpeakers #HomeAudio #SurroundSound #HomeTheater #AudioTechnology #SpeakerInstallation #WirelessAudio #SoundQuality

The Focal On Wall 301 loudspeakers are designed to offer high-performance audio in a slim, on-wall form factor, addressing the aesthetic challenge posed by increasingly thin flatscreen televisions. These speakers are just 3.5 inches deep, allowing them to blend seamlessly into a home theater setup without the bulk of traditional loudspeakers. While primarily designed for wall mounting, Focal also offers optional floor stands for alternative placement. The review highlights the speakers' construction and design. They feature a pair of 4-inch Flax Sandwich Cone drivers, known for their rigidity and damping properties, sandwiching a 1-inch aluminum/magnesium inverted dome tweeter. This configuration aims to deliver a neutral sound profile. The speakers have a rated frequency response of 53Hz–28kHz (+/- 3dB) with a crossover at 2,500Hz, and they are designed to be driven by amplifiers between 25 to 130 watts. Manufacturing of the Focal 300-series speakers takes place in France, distinguishing them from many mass-produced audio components. The cabinets are bass-reflex designs with ports at both the top and bottom. When mounted vertically, they stand 31.5 inches high and weigh 13 pounds, necessitating secure attachment to wall studs. They can also be mounted horizontally to serve as a center channel speaker. The speakers come with magnetic cloth grilles and are available in gloss white or satin black finishes. For immersive audio experiences like Dolby Atmos or DTS:X, Focal suggests complementing these with their 300-series In Wall speakers for ceiling installations. Evaluation of the optional floor stands reveals some design considerations. While stable, the close proximity of the stand's vertical shaft to the speaker's back panel can make connecting speaker cables with banana plugs difficult, potentially preventing full engagement with the lower mounting hooks. This issue, while not affecting audio performance significantly, is noted as a practical concern for users not employing bare wire connections or recessed wall boxes. In terms of audio performance, the Focal On Wall 301 speakers demonstrated impressive capabilities across various musical genres. They successfully reproduced deep bass frequencies, intricate instrumental details, and clear vocals. Tests included tracks with prominent kick drums and electric bass, complex horn sections, detailed drumming, and live recordings with rich soundscapes, all of which the speakers rendered with distinct clarity and dynamic range. The speakers excelled in separating individual instruments and maintaining sound integrity, even in complex arrangements. Overall, the Focal On Wall 301 loudspeakers are presented as a compelling solution for individuals seeking high-fidelity sound without compromising on modern interior aesthetics, particularly appealing during their promotional sale period. #FocalLoudspeakers #OnWallSpeakers #HomeTheaterAudio #SpeakerReview #AudioTechnology #SoundQuality #HomeEntertainment #SlimDesign #HighFidelity

Stealth Acoustics, a company specializing in invisible speaker technology, has introduced its 8th generation LineaRadiance (L-RAD) family of speakers and subwoofers. These new models, building upon the LineaResponse flat radiating diaphragm speakers first launched in 2003, are designed to offer discreet audio solutions for both residential and commercial settings. The LineaRadiance speakers are engineered to be installed in walls or ceilings and can be painted over or covered with light wallpaper, fabrics, or select texture coats, effectively blending into the interior design while delivering sound. The manufacturer is expected to release up to five new LineaRadiance speaker models in 2024, with a total of nine models planned for release through early 2025. Key advancements in the L-RAD series include new internal components and an integrated, acoustically tuned back box made from injection-molded material. The speakers are hand-built in the USA and feature several innovations aimed at improving both sound quality and ease of installation. These innovations encompass the Fidelity Glass Advanced tuned and dampened fiber diaphragm, a new woofer mounting system designed to increase internal air volumes, and an Easy-Tape tapered frame/diaphragm edge for a smoother finish. Additionally, new transducer/exciter driver designs have been incorporated to enhance efficiency and power handling. The re-voiced crossovers ensure a seamless transition between high and low frequencies, contributing to a balanced audio output. Initial details have been released for two models within the new L-RAD lineup: the L-RAD 116 and the L-RAD 430. The L-RAD 116 is a 2-way speaker featuring a 6.5-inch woofer within a 16-inch by 16-inch frame. This model is presented as an entry-level option that still provides good audio performance. It includes two independent protection circuits for high/mid-frequency and low-frequency sections, which automatically reset if excessive amplifier power is detected. The L-RAD 430 is a more advanced 3-way speaker, equipped with dual high-power 8-inch woofers, a 30mm direct coupled neo-magnet mid-frequency driver, and a 25mm direct coupled neo-magnet high-frequency driver, all mounted on a larger 16-inch by 30-inch frame. Its advanced internal materials are designed to facilitate a broad frequency response, extending from 20Hz down to 35Hz. Similar to the L-RAD 116, the L-RAD 430 also features two independent self-resetting protection circuits for its frequency sections. The L-RAD 116 is priced at $1,400 per pair, while the L-RAD 430 is available for $3,000 per pair. These speakers are available through authorized dealers and installers. The company's expansion of its facility, including increased assembly areas and the addition of an injection molding machine, underscores its commitment to the production of these 8th generation invisible speakers. According to Brian Azzano, Vice President of Stealth Acoustics, each speaker undergoes meticulous hand-assembly, inspection, and testing to ensure high quality and improved sound performance, as well as easier installation. The growth of the custom integration (CI) market, driven by consumer demand for high-quality, yet discreet, home audio solutions, positions these invisible speakers as a flexible option for those who prioritize aesthetic integration without compromising on sound quality. #StealthAcoustics #LineaRadiance #InvisibleSpeakers #InWallSpeakers #HomeAudio #CustomInstallation #SpeakerTechnology #AudioEquipment #NewProducts

The IKEA Symfonisk Picture Frame is a collaboration between IKEA and Sonos, integrating a connected Sonos speaker into a piece of wall art. Priced at $199, it is the most expensive model in the Symfonisk range, which also includes a Bookshelf speaker ($99) and a Table Lamp speaker ($189). This price point places it in competition with Sonos' own models like the Sonos One ($199) and Sonos SL ($179), though these traditional Sonos speakers are overtly speakers, whereas the Symfonisk Picture Frame is designed to be more discreet. The speaker's design allows for versatile placement, capable of being mounted in landscape or portrait orientation using a magnetically attached hook bracket, or stood against a wall with included rubber feet. Felt pads on the back protect surfaces from scuffs. The speaker comes with a long, fabric-covered white cable, which can be routed through multiple guides and tucked into a Velcro-secured compartment. This compartment also houses an ethernet port for wired connections and an AC output, enabling daisy-chaining of two Symfonisk Picture Frame speakers with an optional cable to minimize visible wires. Physical controls for play/pause and volume are subtly located on the rear edge, with double or triple taps allowing track skipping. Unlike the Sonos One, it lacks built-in Amazon Alexa or Google Assistant, though playback can be controlled via a separate smart speaker linked to a Sonos account. Setup is straightforward through the Sonos S2 app, requiring an NFC-enabled phone to link the speaker. The Symfonisk Picture Frame integrates seamlessly with the Sonos ecosystem, allowing grouping with other Sonos speakers for multi-room audio or pairing two Picture Frame speakers for stereo sound. These paired speakers can also function as rear channels in a surround sound setup with a Sonos soundbar like the Arc or Beam. However, like other Sonos speakers, only like-models can be paired for stereo or surround sound configurations. Despite initial low expectations due to its slim 2.36-inch depth, the sound quality of the Symfonisk Picture Frame is surprisingly robust. It features a woofer and a tweeter, with the latter designed to broadly spread sound. Trueplay tuning significantly enhances its audio performance. Subjectively, its sound quality surpasses the Symfonisk Bookshelf speaker and is comparable to a Sonos One, albeit with slightly less bass at higher volumes. The speaker delivers a balanced sound profile, suitable for most music genres, making it effective for regular listening in an average-sized room. The device is available in white or black finishes, featuring artwork by Jennifer Idrizi. While the artwork is generally appealing, it is not interchangeable with personal prints as this is not a traditional picture frame. IKEA offers interchangeable panels with different art for $19.99, with new options planned seasonally. The inability to easily customize the artwork is a significant limitation, potentially making the speaker less subtle than a conventional speaker, as it functions more as a fixed art piece rather than a customizable frame. The product represents an aesthetic-focused evolution in the Symfonisk line, moving beyond the initial emphasis on affordability. #IKEASymfonisk #SonosSpeaker #SmartSpeaker #HomeAudio #DesignTech #WallArt #AudioReview #InteriorDesign #HomeDecor

The Media Integration Lab (MIL) in Tokyo features an exceptional audio system designed for professionals, utilizing exclusively Focal in-wall/in-ceiling speakers and subwoofers. This installation boasts a cumulative amplification power of 21,000 watts, aiming to deliver an unparalleled 3D sound experience for both music and movies. The MIL was established by Focal's official distributor in Japan, collaborating with significant content producers like NHK, and serves as a premier demo system for object-oriented audio tracks. This spherical auditorium is optimized for creating the most immersive sound possible, providing audio professionals with a dedicated environment to evaluate the immersion levels of various content. It supports numerous immersive audio formats beyond standard stereo and 5.1 surround sound, including Sony 360RA, Dolby Atmos, Auro 3D, Hamasaki 22.2 (NHK 8K Super Hi-Vision), Ambisonics, and DTS:X. The acoustic design of the MIL is structured as a sound bubble surrounding the listener. It incorporates twelve vertical arches, each housing two built-in speakers and a custom-made subwoofer with a 12-inch Flax driver. The three central columns facing the listener integrate a Focal 1000 IW LCR Utopia in-wall speaker, topped with a Focal 1000 IW6 speaker. Other columns feature a Focal 1000 IW LCR6 speaker beneath a Focal 1000 IW6. A halo of twelve Focal 1000 IW LCR6 speakers positioned at the top of these arches directs vertical sound effects towards the listening area. Additionally, a Focal 300 IW LCR6 speaker is centrally located above the listener to reproduce the “voice of God” channel, specifically for Auro-3D configurations. Further enhancing the immersion, five Focal 300 IW LCR6 in-wall speakers are integrated into the floor, facing upwards, with three in front of the listener and one on each side of the chair. Two Focal Sub 1000F subwoofers augment the front soundstage. The electronics powering this system are high-end, featuring a Panasonic DMR-ZR1 4K UHD Blu-ray player/recorder and a Panasonic DMR-UBZ2020 4K UHD Blu-ray player, along with a Yamaha CX-A5100 A/V preamplifier. An Innosonix MA32/D power amplifier delivers 9000 watts across 32 channels, complemented by a Pro Tools MTRX audio interface, Focusrite RedNet A8R AD/DA converter, and a Focusrite RedNet D64R digital audio bridge. Six Lab Gruppen D Series 20:4 power amplifiers contribute an additional 12,000 watts. For visual presentation, the MIL employs a JVC projector and an electric projection screen with an acoustically transparent surface, positioned in front of the three frontal arches. This sophisticated setup, capable of delivering sound over 42.3 channels, ensures total immersion. Focal stands as the sole manufacturer globally to provide such a comprehensive immersive system for professional use, indicating a promising future for immersive cinema experiences. #FocalAudio #ImmersiveSound #HomeTheater #AudioSystem #MediaIntegrationLab #FocalSpeakers #DolbyAtmos #Auro3D #HighEndAudio

KEF has introduced two new architectural subwoofers, the Ci200QSb-THX and the Ci200TRb, designed for in-wall or in-ceiling installations. These products aim to provide substantial bass performance without occupying floor space, catering to aesthetic preferences and spatial limitations in modern home designs. The announcement was made at the 2016 CEDIA Expo in Dallas, Texas. The Ci200QSb-THX is an 8-inch square subwoofer that is THX-certified, offering various configuration options. When four Ci200QSb-THX units are paired with a KASA500 amplifier, they achieve THX Select 2 certification standards. For more demanding audio environments, combining eight Ci200QSb-THX subwoofers with a KASA500 amplifier allows them to meet THX Ultra 2 certification standards. This indicates a high level of audio performance and adherence to specific industry benchmarks. In contrast, the Ci200TRb is an ultra-thin architectural speaker featuring an 8-inch dual-voice coil subwoofer. Its notable characteristic is its minimal mounting depth of just 50mm (1.96 inches), making it suitable for installations where cavity space is extremely limited. Both models incorporate KEF’s Ultra-Thin Bezel (UTB) technology, which results in a nearly invisible rim around the speaker assembly. This design choice contributes to a seamless integration with interior aesthetics, as the speakers become virtually indistinguishable from other KEF architectural speakers when their grilles are in place, providing significant flexibility for installers and designers. Both the Ci200QSb-THX and Ci200TRb operate in two distinct modes. In passive mode, they serve as an effective solution for enhancing the bass response of existing architectural sound systems. Their design allows them to fit within standard 2x4 inch construction cavities, facilitating a clean and minimalist look in whole-house audio setups. For enhanced performance, in active mode, these subwoofers are designed to be paired with KEF’s KASA500 subwoofer amplifier, a 250WPC Class-D DSP amplifier. This active configuration enables the subwoofers to deliver extended and emphasized low-frequency sound. A significant feature of all KEF Ci architectural speakers, including these new models, is their Marine Grade Construction. This robust build quality ensures durability and longevity, even in challenging environments. The grilles are treated with a corrosion-resistant coating, the terminations are moisture-resistant, and the plastic components are UV-protected. These design considerations mean that the subwoofers are capable of withstanding harsh conditions, such as salt-spray and high humidity, making them suitable for outdoor applications or installations in coastal areas where environmental factors could typically degrade electronic equipment. KEF aims to provide a solution for consumers seeking powerful bass without compromising on interior space, with availability starting in December, priced at $400 for the Ci200QSb-THX and $425 for the Ci200TRb. #KEFAudio #InWallSubwoofer #InCeilingSubwoofer #THXCertified #ArchitecturalSpeakers #HomeTheaterAudio #SpaceSavingDesign #MarineGrade #CEDIAExpo

Pro Audio Technology, a prominent provider of high-output loudspeakers, subwoofers, and DSP loudspeaker controllers, introduced the SR-2408iw, a thin-profile, high-output loudspeaker. This new product is designed for in-wall and in-ceiling installations where space constraints are significant but high-fidelity audio performance is critical. The SR-2408iw is suitable for both retrofit and new construction projects, offering high output and versatility within its slim 4-inch depth and all-aluminum construction. This makes it an ideal solution for luxury home theaters, commercial establishments, and even marine applications like yachts. The loudspeaker can serve multiple roles within an audio setup, functioning as a main, side, rear, or surround speaker, as well as height channel speakers for immersive audio formats such as Dolby Atmos. Its construction ensures durability and suitability for diverse environments, including those with challenging conditions, as highlighted by Pro Audio Technology President and Product Designer, Paul Hales. He noted that the all-aluminum build makes the speaker particularly resilient in harsh environments like those found on yachts, while also facilitating impressive fidelity and output despite its compact 3.5-inch internal depth. Key features of the SR-2408iw include a tri-amplified, sealed cabinet design incorporating a 1.5-inch ring radiator tweeter, two high-efficiency 4-inch midrange drivers, and an 8-inch long-throw woofer. The speaker offers flexible sound aiming capabilities with two waveguide options: a 0-degree straight-firing axisymmetric configuration or a 40-degree asymmetric waveguide. The latter allows sound to be directed precisely towards the main listening position, even when the speaker is mounted flush in a standard 2 x 4-inch wall. This angled waveguide is particularly beneficial in confined spaces, such as residential rooms or yachts, where traditional speaker placement for optimal sound can be challenging. For more expansive installations, an optional pivot bracket is available, enabling installers to surface-mount the SR-2408iw and accurately aim it towards a specific listening area. Despite its shallow 4-inch cabinet depth, the speaker boasts a broad frequency response ranging from 45Hz to 22kHz. An optional, paintable perforated metal grille is also available, allowing for seamless integration into various interior designs. Technical specifications detail an impedance of 8ohms for the low frequency (LF), 4ohms for the mid-frequency (MF), and 8ohms for the high frequency (HF). The sensitivity ratings are 92dB LF, 98dB MF, 108dB HF, and 110dB HF for the 40-degree configuration. It is designed for tri-amplification, supporting a maximum peak SPL of 119dB. Power handling capacities are 500W LF, 400W MF, and 120W HF, with recommended amplifier power ranges of 250W–1000W for LF, 125W–500W for MF, and 125W for HF. The speaker connects via Euroblock terminals and weighs 18 lbs. The cutout dimensions are 10.25 x 26.375 inches, and the grille measures 11.6 x 27.6 x 0.18 inches. The grille is offered in white and is paintable. The SR-2408iw is accessible to consumers through authorized US and international distributors. Prospective buyers can contact Mark Goldman, Pro Audio Technology’s VP of sales, for detailed pricing and availability information. #ProAudioTechnology #SR2408iw #InWallSpeakers #InCeilingSpeakers #CEDIA2022 #HomeTheater #ImmersiveAudio #DolbyAtmos #HighFidelityAudio #CustomInstallation