
1/6
This pole wrap IKEA hack turned basic EKET cabinets into a built-in media wall for a super-stylish, neutral living room
This article details a DIY project by home renovator Lindsey Learmonth, known as @thedcdiyer, who transformed basic IKEA EKET cabinets into a stylish and functional built-in media wall with fluted cabinet fronts for her neutral living room. The project aimed to create multifunctional storage that could house children's toys and other items, addressing a common challenge for families with young children in limited living spaces. Lindsey's living room is the first area entered in her Washington D.C. row home, necessitating an aesthetic and practical storage solution.
The initial setup involved assembling and securing several IKEA EKET cabinets to the wall studs. She utilized three EKET cabinets with double doors, one single-door cabinet, and four sets of EKET double drawers to maximize storage and introduce variety to the wall system. The choice of the slim 13 ¾-inch deep EKET cabinets was strategic for her long and thin row home, preventing the storage unit from encroaching too much on the limited space while still accommodating all of her children's toys.
To elevate the aesthetic, Lindsey added a pine top to the cabinet surface. This involved using pocket holes, routing the edge, sanding, staining, and sealing the wood, then attaching it from underneath the cabinets. The most distinctive feature of the hack is the use of pole wrap for the cabinet fronts. After precise measurement and cutting, the pole wrap was attached to the cabinet faces and drawers using glue and brad nails. The holes left by the brad nails were then wood-filled and wet-sanded to achieve a smooth finish. Lindsey advised that, in hindsight, applying the pole wrap to the doors and drawer fronts before assembling the units would have simplified the process.
Following the cabinet transformation, Lindsey focused on creating the built-in shelving. This part of the project was entirely DIY, utilizing ¾-inch plywood and dado joints. The entire structure was then attached to the wall using floating shelf pins. All rough edges were edge-banded before staining to match the pine top of the cabinets, ensuring a cohesive look. For the wall backdrop behind the shelves, Lindsey applied a DIY Roman Clay paint effect, contributing to a rustic aesthetic that seamlessly integrates the shelves into the space.
For the finishing touches, beige acrylic paint was used on the edges of the EKET doors and drawers to blend them with the pole wrap fronts. Custom headers were installed, and hardwired picture sconces from Amazon were added to the top of the shelves, powered by a wireless switch. The final step involved carefully curating the shelf decor with books, vases, and houseplants, maintaining a minimalist yet cozy ambiance. This DIY project not only provided significant functionality and elevated the living space's appearance but also resulted in substantial cost savings, estimated to be between $15,000 and $20,000 compared to professional custom-built solutions in Washington D.C. The entire project cost under $1,000, showcasing the value and satisfaction derived from such IKEA hacks and DIY endeavors.
#IKEAHack #DIYHomeDecor #BuiltInStorage #NeutralLivingRoom #PoleWrap #FlutedCabinets #HomeRenovation #BudgetFriendly #ScandiStyle #IKEAHack #DIYHomeDecor #BuiltInStorage #NeutralLivingRoom #PoleWrap #FlutedCabinets #HomeRenovation #BudgetFriendly #ScandiStyle
0 comment in total
No comments yetYou may also like


































































