How to change grout color - the easiest little touch to make your home feel fresh again

This article details a low-cost, high-impact kitchen transformation achieved by changing the color of tile grout. The author shares their experience using Custom Building Products Polyblend Grout Renew Colorant to update a kitchen backsplash for less than $25 and in approximately 90 minutes. The article emphasizes that while the change might seem minor, affecting only a 0.25-inch seam, the visual impact on the entire room is significant, comparable to how accessories can complete an outfit. The motivation for changing grout color can be practical, such as refreshing old, grimy grout or updating an outdated color palette. However, the author also suggests using grout color creatively to harmonize with wall colors or to create a uniform look with the tiles. The process, although simple, is described as tedious, with the required time varying based on the tiled area's size; a kitchen backsplash typically takes about an hour, while a large walk-in shower would require more time. The Custom Building Products Polyblend Grout Renew Colorant is highlighted for its wide availability at Home Depot and its extensive color range of 40 options. An additional benefit of this specific product is its sealing property, which offers protection against future staining from dirt, grime, mold, mildew, rust, and hard-water deposits. A list of necessary tools for the project includes the grout colorant, a toothbrush, a small cup, a disposable rag, a sponge, a dropcloth or plastic sheeting, and kneepads for low-to-the-floor work. The article advises contacting the manufacturer to determine the amount of colorant needed, as coverage varies with tile size and grout width. For instance, a 3-by-6-inch subway tile with a 0.25-inch grout line would require one 8-ounce bottle for about 75 square feet, sufficient for a standard tub surround. Before application, a thorough cleaning of the grout is crucial to remove dirt and loose particles, followed by complete drying. Preparation also involves laying down protective covers to catch drips and hardened colorant bits. The application itself involves spreading the colorant with a toothbrush, working it into the grout lines, especially for sanded grout. The author suggests working in small sections of 1 to 2 square feet at a time and not worrying about getting colorant on the tile surface. Excess colorant should be wiped off the tile face within four to five minutes, ideally when it is dry enough not to lift from the grout but still wet enough to be removed from the tile. This is done in two stages: first with a dry rag, then with a dry sponge (soft side followed by abrasive side) for precise cleaning along the grout edges. The process is repeated until all tiled areas are colored. Finally, the colorant should be allowed to dry for at least 30 to 60 minutes, with an overnight cure preferred before exposure to water. The article also provides warnings about common pitfalls: avoiding grout pens due to their ineffectiveness on sanded grout and quick wear, ensuring sealed grout is stripped of its sealer before colorant application, and refraining from using colorant on unglazed tiles unless they can be meticulously sealed without affecting the grout. Lastly, the colorant does not repair loose grout, which must be fixed prior to coloring. #KitchenRenovation #GroutColorant #DIYHomeImprovement #BudgetDecor #TileBacksplash #HomeDecoration #HomeMaintenance #QuickHomeUpdate

The article emphasizes the often-overlooked importance of grout color in home tiling projects, asserting that it is as crucial as the tile choice itself. Carrie Waller, founder of Dream Green DIY, highlights how grout can dramatically enhance or detract from the aesthetic appeal of a tile installation. Many individuals spend considerable time selecting tiles but neglect the grout, a mistake that can undermine the entire design. Waller advises against making a last-minute grout decision. Instead, she recommends choosing grout color concurrently with tile selection. To facilitate this, she suggests picking up free grout color sheets from home improvement stores. These sheets provide true-to-life printed blocks of color from manufacturers. It is crucial to examine these color sheets at home in the specific room where the tiles will be installed, allowing for an accurate assessment under the room's unique lighting conditions. Homeowners should also have their chosen tiles on hand to place next to the grout printouts for a realistic preview of the final look. Another key consideration is the size of the grout lines, which can be manipulated to achieve different design effects. Grout color can either complement a minimalist aesthetic or contribute to a maximalist design. For those seeking a balanced approach, Waller suggests selecting a grout color that is one or two shades lighter or darker than the tile. When a bold grout color is chosen, its visual impact can be toned down by opting for slimmer grout lines. This can be achieved by using 1/16-inch spacers during tiling instead of 1/8-inch spacers, resulting in a more refined yet still visible grout line. The application process also demands attention, particularly regarding the removal of excess grout. Waller advises considering the thickness or thinness of the tiles, as this should guide the amount of grout left behind. She cautions against leaving thick, uneven grout lines, which can indicate an amateur application. To ensure a professional finish, a heavy hand should be used when wiping away wet grout from between the tiles. The sponge should be passed back and forth gently but firmly until the edges of the tiles become visible. This technique helps to hide any DIY work and ensures a clean, polished appearance. The article concludes by offering four favorite grout color ideas, along with examples of when to use them. Alabaster grout is recommended for marble tiles to accentuate dark veining. Charcoal grout is suggested to add a bold contrast to classic white subway tiles. Coral grout, inspired by Kelly Mindell of Studio DIY, is presented as a subtle blush option for white or gray penny tiles, particularly when paired with gold plumbing fixtures. Finally, bright white grout is recommended for black hexagon tiles to highlight their unique shape and make the tile work stand out. These examples illustrate how strategic grout color choices can elevate various tile styles and overall room designs. #GroutColor #TileDesign #HomeRenovation #InteriorDesignTips #DIYHomeImprovement #BathroomDesign #KitchenDesign #ColorCoordination

The trend of using colourful grouting in kitchens and bathrooms has gained significant traction on social media, with influencers showcasing a spectrum of hues from sunny yellow and vibrant orange to grass green and contrasting black. While traditional regrouting can be a substantial undertaking, a more accessible and affordable approach involves using grout pens, which can achieve a similar aesthetic for as little as £3.90. This method allows individuals to participate in the home decor trend without the extensive effort typically associated with learning how to grout tiles or undertaking a full renovation. Interior design experts highlight the transformative potential of coloured grout. Chris Dance, Showroom Manager at InHouse Inspired Room Design, notes that altering grout shade can dramatically impact a room's appearance, offering a way to refresh home design without major alterations. He suggests it's an excellent option for making vibrant tiles pop or subtly enlivening neutral tiles with a bright, fun twist. Barrie Cutchie, Design Director at BC Designs, echoes this sentiment, observing a strong trend in pairing plain white tiles, particularly brick or metro shapes, with dark grout to achieve a chic finish. This adaptability makes colourful grout a versatile design element. However, the choice of grout colour necessitates careful consideration. Warren Kinloch, a bathroom interiors expert at Bathroom Deal, cautions against impulsive decisions, explaining that an ill-chosen colour can negatively affect a space from both design and practical standpoints. He also points out a potential drawback of coloured grout: its tendency to discolour over time, which increases the need for diligent cleaning and maintenance. Therefore, those considering colourful grout must be prepared to commit to additional upkeep to preserve its aesthetic appeal. Among the various quick-fix tools available, grout pens, particularly those from Rainbow Chalk, are identified as a popular and expert-recommended solution. Warren Kinloch praises Rainbow Chalk's wide range of colours, advising users to ensure the pen's applicator size is appropriate for their grout lines to prevent mess. While grout pens are excellent for touch-ups and refreshing existing grout, they are not a complete replacement for traditional grouting. Warren emphasizes that while they offer an affordable fix for renters or minor updates, they lack the longevity and durability of conventional grout. Chris Dance adds a note of caution, advising users to be careful as the pens can stain tiles if they leak or if one's hand slips during application. In essence, grout pens serve as an effective temporary solution for revitalizing grout, but they may require more frequent maintenance compared to a full regrouting project. #ColourfulGrouting #GroutPens #HomeDecorTrends #BathroomDesign #KitchenDesign #DIYHome #InteriorDesignTips #TileGrouting #HomeRenovation

The article explores the emerging interior design trend of using colorful grout instead of traditional neutral shades like white or gray. It highlights how this approach can introduce an unexpected burst of color and intentionality into various spaces, moving beyond the conventional role of grout as a background element. Designers are increasingly opting for vibrant and unusual hues to enhance the overall aesthetic of tiled surfaces. Jackie Ho, founder of Ho & Lacy, explains that custom-colored grout allows for a tailored match to a project's palette, adding a layer of intentionality at a relatively inexpensive cost. She emphasizes that careful consideration of the tile's color, finish, size, and shape is crucial to ensure the chosen grout color enhances rather than competes with the design. It's also noted that grout can cure differently from control samples, requiring flexibility in expectations. The article delves into three specific unexpected grout colors that designers have successfully integrated into their projects. The first is earthy terracotta, a color trend that provides a subtle hint of warmth without being overly bold. İrem Başer, partner and interior designer at Escapefromsofa, illustrates how a deep earthy grout tone in a bathroom unifies the space, creating depth and warmth. This choice accentuates the geometric structure of walls and floors, adding texture and transforming the bathroom into a sensorial experience. It challenges the notion of grout as merely a functional background element, instead making it a key part of the design narrative. Next, the article discusses ochre yellow grout. While yellowing grout is typically avoided, a deliberate ochre shade can elegantly elevate plain tiles by adding a clear yet subtle pop of color. Ochre, a blend of orange and rich brown, has been a long-standing interior favorite. Jackie Ho shares an instance where a 'burnt mustard' grout, evolved from sunflower yellow to a deep ochre, was used with cream square tiles in a child's bathroom, achieving a perfect balance of playfulness and warmth. Finally, deep blue grout is presented as a sophisticated alternative to darker neutral grouts like gray or black. This softer option pairs well with lighter-colored tiles and can also help reduce the contrast between deep blue tiles and traditional dark grouts. Grazzie Wilson, Head of Creative at Ca’ Pietra, notes that deep blues, terracotta, and sage green are predicted to be main interior colors for 2025 in kitchens and bathrooms. She suggests that plain white tiles with deep blue grout are replacing the gray grout prevalent in recent years, aligning with a broader shift towards more calming and purposeful color choices in interiors. In conclusion, the article argues that these unexpected grout colors, while a departure from tradition, are highly livable. They offer a way to soften the overall appearance of tile designs and contribute to a more cohesive and aesthetically pleasing interior, rather than just making a bold statement. The adoption of colorful grout signifies a move towards greater personalization and design sophistication in home interiors. #GroutColors #InteriorDesignTrends #TileIdeas #EarthyTerracotta #OchreYellow #DeepBlueGrout #HomeDecoration #BathroomDesign #KitchenDesign

This article explores the growing design trend of utilizing colored grout to enhance tiled surfaces in various residential settings. It presents several case studies showcasing how different colors and materials of grout can dramatically alter the aesthetic of a space, moving beyond traditional white or gray options. The first example features a bathhouse in central Victoria, Australia, where Partners Hill used slip-glazed clay bricks with contrasting mortar to match the raw clay color of the other sides, creating a cohesive and earthy look within a greenhouse-like environment. This design choice contributes to a rural enclave that also hosts a cooking school and reception venue. Another instance highlights a London Victorian terrace renovated by Office S&M, where a strict no-gray policy led to a vibrant and bold interior. The ground-floor bathroom incorporates marbled countertops made from recycled materials by Smile Plastics, paired with cheerful yellow grout outlining white tiles on both floors and walls. The kitchen in the same residence features pink square Domus tiles with turquoise blue Mapei grout, which complements the pale blue pantry and teal cabinetry, demonstrating a playful and harmonious color scheme. In Seattle, architect Michelle Linden's renovation of her 1920s home involved opening up the space to light and color. For the living room's new fireplace surround, she opted for Cava Tile and custom-mixed salmon pink grout, highlighting the potential for personalized color choices to achieve a specific aesthetic vision. The article also touches upon an Australian home designed by State of Kin, where the choice of materials and colors was inspired by the Western Australian landscape. In the wet areas, terra-cotta grout was used to offset simple white Sugie tiles, grounding the design in local influences. An L.A. home owned by art collectors, renovated by Síol Studios, features dark terra-cotta floor tiles that extend to the terrace. A subtle yet impactful detail is the brass inlay in the grout line where the kitchen flooring meets the island's brass backsplash, designed to catch the evening light and illuminate the line. A London couple's renovation of an 1890s Victorian terrace included a first-floor bathroom with herringbone wall tiles from Topps Tiles set off by an earthy-hued grout, complementing copper fixtures crafted by the homeowners. The article further details a minimalist black-and-white kitchen in an Upper West Side brownstone apartment, where elongated black tiles are contrasted with lighter gray grout, creating a sleek and modern look. A tiny 355-square-foot apartment in Taipei, renovated by Phoebe Sayswow Architects, adopts a Muji-like minimalist aesthetic with white walls, birch plywood, and glazed white tiles, strikingly accented with cherry-pink grout. This pink grout continues into the bathroom, tying the spaces together and adding a playful element to the minimalist design. Finally, a guest bath in a vacation home in Crested Butte, Colorado, designed by Gina D'Amore Bauerle, features gray glass herringbone tiles with lime-green glitter grout, showcasing a bold and unexpected color choice. In Singapore, a flat renovated by Open Studio uses terra-cotta tiles with matching grout to introduce a youthful dimension to bedrooms and bathrooms, balancing the moody social areas. Another example from Madrid highlights an apartment by elii, where blue grout is used in the bathroom to introduce bright color, contrasting with yellow drawers and hardware. These diverse projects collectively illustrate that grout, often overlooked, can be a powerful design element capable of introducing color, texture, and personality into a space, creating unexpected visual interest and contributing significantly to the overall design narrative. #GroutDesign #TintedGrout #TileDesign #HomeRenovation #InteriorDesign #ModernInteriors #ColorInDesign #ResidentialArchitecture #DesignTrends

Bathroom tiles play a crucial role in the overall aesthetic and functionality of a bathroom. However, several common issues can detract from their appearance, making them look inexpensive and diminishing the overall design. Understanding these factors and knowing how to address them can help maintain a stylish and luxurious bathroom. One significant problem is physical damage to tiles, such as chips, cracks, and scratches. Even minor damage can make a bathroom appear old and poorly maintained, especially with darker-hued tiles. The ideal solution involves replacing the damaged tiles. It is recommended to order extra tiles during initial installation to ensure a perfect match in terms of color and finish, as production batches can vary. Having spare tiles readily available simplifies the repair process and helps maintain a cohesive look. Another critical aspect is color cohesion within the bathroom. If bathroom color schemes and tiles clash, it can create a jarring and cheap appearance. To avoid this, consider color drenching, where tiles and paint colors are selected in the same tone for a bold and immersive scheme. Alternatively, creating contrast with brightly colored tiles against neutral walls or white tiles with saturated colors can add visual interest and balance. For example, a deep green wall color paired with lighter, natural floor tiles can introduce drama while still maintaining a cohesive design. Improper cleaning practices also contribute to the degradation of tile appearance. Using the wrong cleaning products can cause more harm than good, particularly for delicate materials like cement and encaustic tiles. These materials require pH-neutral, acid-free cleaners and warm water to remove residues without causing damage. Acidic cleaners, in particular, should be avoided as they can scratch the tile surface, leading to a dull and worn look. Shiny tile finishes can also make a bathroom appear cheap and outdated, especially in spaces with excessive natural light. Overly glossy surfaces often create harsh reflections that highlight imperfections. For new installations, opting for matte finish tiles can provide a more sophisticated and timeless aesthetic with a softer, natural texture. If replacing tiles is not feasible, adjusting bathroom lighting to softer, warm tones or using dimmable lights and LED strips around mirrors can help diffuse light and elevate the space's ambiance. Build-up of dirt, grime, and limescale is a common issue in humid bathroom environments, often affecting tiles disproportionately. This build-up can make even luxurious materials like marble appear tired. Regular maintenance with specialist neutral cleaners is essential. For severely affected tiles, a thorough cleaning with an alkaline cleaner followed by resealing can restore their original luster and expensive appearance. Mismatched floor and wall tiles can also undermine an otherwise well-designed bathroom. An elevated bathroom design relies on seamless integration of colors, materials, and finishes. Therefore, careful selection of floor and wall tiles that complement each other is crucial. Tonal designs, where both floor and wall tiles are in warm neutrals, create a consistent flow. Varying tile shapes within a tonal scheme can add necessary visual interest without clashing. Finally, grout discoloration is a prevalent issue that can make an entire tiled area look aged and cheap, even if the tiles themselves are in good condition. Stained, discolored, or crumbling grout instantly degrades the overall aesthetic. Addressing this involves redoing the bathroom tile grout lines to refresh the finish. This relatively simple fix can significantly improve the perceived value and cleanliness of the bathroom. In conclusion, many factors can contribute to bathroom tiles looking cheap, ranging from physical damage and improper color coordination to incorrect cleaning and grout issues. Most of these problems are rectifiable, with experts offering practical solutions such as replacing damaged tiles, choosing complementary colors, using appropriate cleaning products, opting for matte finishes, regular maintenance, and re-grouting. Implementing these fixes can transform a bathroom into a stylish and luxurious space without extensive renovations.

Grout, when aged by consistent exposure to water, sun, and spills, can cause a space to appear dated. While regrouting can be a significant undertaking, painting grout offers a relatively simple and efficient alternative. This process can typically be completed in a single afternoon, as advised by professional painters. The key to successful grout painting lies in proper preparation and the selection of appropriate products. Yes, painting grout lines is entirely feasible, similar to painting tile backsplashes or entire kitchen and bathroom tiles, provided the surface is adequately prepared and the correct paint type is used. This method extends beyond small backsplash sections, applying equally well to walls, floors, and even furniture. According to Tom Laurent, North GA regional director at Bear Mountain Custom Painting, painting grout is often a more effective solution than extensive scrubbing, which might not fully restore the original color, especially if the grout is heavily stained. However, it's important to note that lighter grout colorants may not completely conceal severe stains. This DIY task is also cost-effective compared to hiring professionals for regrouting. Despite its simplicity and affordability, there are essential considerations to ensure a successful outcome. First and foremost, selecting the right paint is crucial. Professionals recommend two primary options: grout paint pens and specialized grout paint applied with a brush. Grout paint pens, favored by Shlomo Cherniak, founder of Cherniak Home Services, offer precise application, minimizing spills and uneven lines. These pens are ideal for smaller areas; however, they can become costly for larger sections. For more expansive surfaces, tubs of grout paint used with a small brush are recommended. Andre Kazimierski, CEO of Improovy, advises applying grout paint in coats, allowing each layer to dry completely before the next. A steady hand or masking tape is essential when using a brush to prevent paint from spreading onto the tiles. Before painting, thorough cleaning of the grout is necessary to ensure proper paint adhesion. While painting can refresh the appearance, it does not negate the need for initial cleaning. Methods such as cleaning with vinegar or baking soda pastes can effectively remove grease and soap scum. After cleaning, the grout should be wiped down with a damp cloth and allowed to dry completely. During the application process, immediate cleanup of any paint spills on tiles is critical. Unlike grout, which is porous and absorbs paint, tiles can retain dried paint, making removal difficult and potentially damaging their appearance. Shlomo Cherniak emphasizes that any paint outside the grout lines should be wiped away instantly with a damp cloth before it dries. Finally, to protect the newly painted grout and enhance its durability, a translucent sealant should be applied once the grout paint is dry. This sealant safeguards the paint from moisture and stains and contributes to easier future cleaning. Professional handyman Shlomo Cherniak suggests cleaning the area again after the sealant has dried to fully appreciate the renovated look. Grout lines in showers can also be painted, provided the area is well-prepared and a durable, waterproof topcoat is applied to withstand moisture and daily wear. While painting over old grout is an option for a lasting change, especially if complete regrouting is not desired, it is best suited for sealed or glazed tiles. Home improvement expert Tony Adams from DIYGeeks warns against using grout paint on unsealed natural materials like terracotta, as they can absorb the paint, making removal difficult. For natural materials, applying a tile sealer beforehand is recommended. #GroutPainting #HomeImprovement #DIYHome #InteriorDesign #TileMaintenance #GroutRefresh #PaintingTips #HomeMaintenance #GroutSealing

This article explores the growing trend of using colorful grout and tile combinations in interior design, moving beyond traditional white, black, and gray grout hues. The trend offers versatility, allowing for subtle pops of color or bold, high-contrast statements. It also presents opportunities for monochromatic looks by matching tile and grout in the same color family, or by using slightly lighter or darker shades for added depth. Various combinations are highlighted to inspire readers. For instance, pairing white tile with dark blue grout offers a fun pop of color, especially when complemented by blue accents in the kitchen. Intentional yellow grout with plain white tile can create a cheerful, sunny feel, particularly when paired with warm-toned elements like wooden doors. Orange tile and yellow grout combine to create a warm and energizing retro vibe suitable for shower walls, echoing popular interior design aesthetics of the 1960s and 70s. For a striking complementary look, soft blue tile with orange grout is suggested, blending modern freshness with a retro touch, especially when finished with gold accents. Dark blue tile can be softened by dusty pink grout, creating a relaxing, spa-like aesthetic, especially when combined with plants. Pale gray tile with yellow grout offers a softer, understated cheerfulness compared to white and yellow combinations. Bright orange grout with crisp white tile is presented as an upbeat choice for children's bathrooms, promoting feelings of happiness and joy. Burnt orange grout and matching wall paint paired with white tile can create an inviting, warm space, capturing the essence of 'golden hour'. Brown tile and golden yellow grout are ideal for achieving a midcentury modern feel, especially when complemented by walnut cabinetry and brass hardware. Green grout with white tile is a way to incorporate the popular green trend into bathrooms without committing to entirely green walls, and pairs well with gold accents. Terracotta grout alongside white tiles brings this popular design trend into spaces, with examples featuring unique oval tiles and matching vanity colors. Monochromatic pink tile and grout offer a feminine and romantic feel, particularly for shower walls, enhanced by silver fixtures. Pale pink tile and yellow grout, though unconventional, create a happy and energetic kitchen backsplash. Robin egg blue tile with burgundy grout provides a high-contrast, dynamic, and balanced aesthetic. Red grout with crisp white tile creates an eye-catching, modern look with a subtle retro edge for kitchen backsplashes or bathroom feature walls. Darker tiles, such as black, can be paired with brighter grout like pink to create a moody yet dramatic atmosphere. Hot pink grout with white tile offers a playful and feminine touch, ideal for kitchen backsplashes or bathrooms. Green tile with blush pink grout is a classic, harmonious combination, especially when the grout color extends to the walls and is accented with gold. Copper-hued tiles, a trending material, can be combined with blue grout for a modern touch, offsetting the warmth of copper with the coolness of blue. Purple tile with mustard yellow grout adds a creative and bright touch to luxurious, dusky purple tones. Light gray tile with salmon-colored grout allows the grout to be the focal point, transforming classic tiles into a modern masterpiece. Finally, white scallop tile with gold grout brings texture, charm, and elegance to kitchens, bathrooms, or mudrooms, while sage green tile with matching grout creates an earthy and grounding, spa-like bathroom environment. White tile with light blue grout offers a softer, less dramatic pop of color, and black-blue tile with golden yellow grout creates a bold and luxurious statement. Metallic brown grout with glossy white arabesque tiles provides an elegant backsplash, especially when paired with brushed brass fixtures. Patterned tiles can be further personalized by choosing a grout color that matches an element within the pattern. #ColorfulGrout #TileCombinations #HomeDecorTrends #InteriorDesign #BathroomDesign #KitchenDesign #GroutColors #ModernAesthetics #RetroDesign

This installment of Brownstone Boys Reno, a reader renovation diary, focuses on the crucial decisions of grout color and joint size for tile installations, particularly in bathrooms and kitchen backsplashes. After carefully selecting tiles for their brownstone renovation in Bed Stuy, the authors emphasize that grout choices significantly impact the final aesthetic and functionality. Grout color can either highlight or obscure tile patterns and colors, while also influencing how readily dirt and grime become visible. A uniform look can be achieved by matching grout to tile color, whereas a contrasting color will draw attention to the tile's shape and pattern. The width of grout joints also plays a role, with wider joints sometimes acting as a design feature themselves. The article details the grout selection process for three tiled areas in their home: the guest bathroom, the master bathroom, and the kitchen backsplash. For the guest bathroom, which features classic hex floret floor tiles and subway wall tiles, all in a matte finish, a medium grey grout was chosen. This decision aimed for a contrast that would define the tile patterns without being overly stark, and also offered the practical benefit of camouflaging dirt better than a very light color. Despite concerns about white residue from soap on dark grout in showers, the medium grey was deemed a successful compromise. In the master bathroom, a more modern aesthetic was pursued with handmade tiles from Fireclay Tile: charcoal grey 4-inch hex for the floor and 6-inch square matte tiles for the walls. Due to the inherent variations in the handmade tiles and the desire to prevent the floor's bold pattern from dominating the space, a slightly lighter grey grout was selected for the floor. This choice helps to unify the varying shades and sizes of the tiles without creating an overwhelming contrast. For the walls, a very light grey grout is being used to blend seamlessly with the white subway tile, and grout release will be applied to prevent staining, given the matte finish's susceptibility. The authors note the significant transformation the grout color brought to the master bathroom's 4-inch hex tiles, enhancing their cohesiveness. Finally, for the kitchen backsplash, which will feature white 2-by-6-inch handmade Fireclay tiles installed in a herringbone pattern, the goal is to emphasize the pattern. A darker charcoal grout color has been chosen for this purpose, and despite the tiles having a slight gloss, grout release will still be utilized as a preventative measure against staining. At the time of writing, the guest bathroom and master bathroom floor have been grouted, with the master bathroom walls and kitchen backsplash remaining. #BrownstoneRenovation #GroutSelection #TileInstallation #InteriorDesign #BathroomRenovation #KitchenBacksplash #HomeImprovement #BedStuy

Choosing the correct type of grout for tiling projects is crucial for durability, aesthetic finish, and ease of installation. The primary distinction between sanded and unsanded grout lies in the presence of sand particles. Sanded grout contains fine sand, which makes it grittier, more robust, and less prone to shrinkage or cracking. This makes it ideal for wider grout joints, typically anything over 1/8 of an inch, and for high-traffic areas such as floors. Its sand content provides a stronger grip, resisting movement and preventing cracks. Sanded grout is also generally more affordable and comes in a wider array of colors, offering more design flexibility. However, its rough texture can scratch delicate or polished tile surfaces like glass, marble, or soft stone. It can also be more challenging to apply in very narrow joints and tends to trap dirt, requiring more rigorous cleaning to maintain its appearance. In contrast, unsanded grout is smoother and does not contain sand. This characteristic makes it suitable for tighter grout joints, typically less than 1/8 of an inch, and for use with delicate or polished tiles where scratching is a concern. It is easier to work into confined spaces and on vertical surfaces like bathroom walls or backsplashes, offering a clean, smooth finish. However, unsanded grout is less durable than its sanded counterpart, making it more susceptible to shrinkage and cracking, especially if applied too thickly or in wider joints. It is also less ideal for high-traffic areas due to its reduced robustness. When deciding between sanded and unsanded grout, several factors must be considered. The width of the grout lines is paramount: narrow lines (under 1/8 inch) typically call for unsanded grout, while wider lines (1/8 inch or more) benefit from sanded grout. The type of tile material is equally important; delicate tiles like glass or polished stone necessitate unsanded grout to prevent scratching, whereas more durable tiles like porcelain or ceramic can accommodate sanded grout. The location of the tiling project also influences the choice; high-traffic areas or floors generally require the strength of sanded grout, while bathroom walls or decorative tile work might be better suited for unsanded grout. Proper application and maintenance are key to the longevity of any grout. Experts advise following manufacturer instructions for mixing and curing times to prevent issues like cracking. Sealing grout, particularly sanded grout in wet areas, is recommended to extend its lifespan and improve mold resistance. While unsanded grout is denser and can offer slightly better moisture resistance in small joints, both types benefit from good sealing and ventilation in damp environments. Mixing sanded and unsanded grout is not advisable, as it can compromise adhesion, color consistency, and structural integrity. Ultimately, an informed choice tailored to the specific project's requirements will ensure a durable and aesthetically pleasing result, avoiding common grouting mistakes and contributing to the overall success of the DIY endeavor. #GroutSelection #DIYHomeImprovement #TilingProjects #SandedGrout #UnsandedGrout #TileInstallation #HomeMaintenance #InteriorDesignTips

The choice of paint colour in a home is a significant decision, given that these colours often remain for years or even decades. Despite this, paint colour trends are increasingly influencing domestic interiors, with a noticeable shift towards both vibrant and pop hues, and more commonly, darker, moody, and jewel-like shades. This growing confidence in using bolder colours is evident across various cultural indicators, including catwalks, automotive design, interior product design, and even television show costumes. Trend forecasters, such as Bonnie Pierre-Davis from WGSN, note a rising interest in tinted darks, initially with blues and now extending to purples, valued for their therapeutic qualities. Carinna Parraman, professor of design, colour and print at the Centre for Print Research, University of the West of England, Bristol, highlights the appearance of deep plum, purples, dark teak, yellow, and green in popular culture, such as the costumes on 'Strictly Come Dancing'. Pantone's "colour of the year 2025" is "mocha mousse," a soft, beigey brown, reflecting a broader trend towards warm-toned beiges, browns, and fawns. Laurie Pressman, vice president of the Pantone Color Institute, explains that their selection process considers a wide array of influences, including entertainment, art, fashion, design, travel, lifestyles, socio-economic conditions, new technologies, materials, and social media. This trend for comforting, warm colours is seen as a natural response, offering a sense of solace. Fiona de Lys, a colour consultant, observes a change from the prescriptive paint trends of the past, like the ubiquitous magnolia of the 1980s. The emergence of brands like Farrow & Ball in the 1990s, with their uniquely named, rarefied colours such as 'elephant's breath', fostered a sense of sophistication and shared knowledge among consumers. However, Dominic Myland, CEO of Mylands paint, points out the subjective nature of colour, where a shade that positively affects one person's mood might trigger a negative response in another, making it challenging for brands to predict the success of new collections. Philippa Stockley, author of 'Restoration Stories' and 'Paint & Make', advises careful consideration when using strong, deep colours, emphasizing the importance of tester pots and observing how colours change with light. The current popularity of rich, deep hues is partly attributed to their seasonal appeal, with warm-toned beiges, browns, and fawns evoking a sense of comfort and warmth, likened to hot chocolate. The article then presents nine specific paint colour trends for consideration. "Mocha Mousse" is Pantone's 2025 colour, suggesting comfort and understated luxury. "Avocado and olive green" are popular for creating immersive, nature-inspired spaces through colour-drenching with multiple shades. "Burgundy and crimson" involve mixing different warm tones to create complementary and impactful designs, often with a powdery, earthy finish. "Plum and grape tones," like Neptune's "clove," offer an enveloping yet not oppressive feel, creating sophisticated and ambiguous statements. "Deep moss green," inspired by the Bloomsbury Group, is described as meditative and soothing, suitable for accentuating smaller areas. "Rich brown," exemplified by Little Greene's "galette," provides a comforting backdrop, especially for natural, rustic finishes, though its suitability can vary with room light and style. "Dusty rose pink and terracotta" are chosen for their warmth and grounding effect, reflecting natural soil colours and regional aesthetic heritage. "Warm, golden yellows" with hints of brown or orange, influenced by artists like Van Gogh, create intriguing and cheerful backdrops. Finally, "ultramarine," such as Paper and Paint Library's "plimsoll," adds drama and personality to small spaces, showcasing a growing demand for bespoke and curated colours in interior design. #PaintColors #HomeDecorTrends #InteriorDesign #PantoneColorOfTheYear #ColorPsychology #HomeRenovation #DecoratingIdeas #PaintSelection #MoodEnhancingColors

The article explores the growing trend of utilizing colorful tile grout as a significant design element in modern interiors, moving beyond its traditional functional role. DeeDee Gundberg, chief designer at Ann Sacks, highlights that grout can either seamlessly integrate with a design through tonal colors or create a bold statement with contrasting hues. The piece presents five instances where designers have effectively used colorful grout in bathrooms and kitchens, challenging the conventional preference for white grout. The first example showcases a mid-century modern kitchen designed by Colleen Slack of Fox Interiors. Here, navy tile grout is employed to unify various blue elements within the space, such as the pantry cabinets and adjacent dining room paneling. Slack explains that the navy grout highlights the diamond tile pattern in the backsplash, providing a subtle yet cohesive pop of color that avoids overpowering the overall design. The second instance features a bathroom by notooSTUDIO, which uses tonal combinations of pink tiles and orange grout to achieve a playful, retro aesthetic reminiscent of 1970s style. Chiara Luzzatto, Art Director and Architect at notooSTUDIO, notes that this color contrast extends to the ceiling, emphasizing that white plaster would have diminished the character of the space. The third illustration demonstrates the use of bright blue grout in a kitchen designed by Mandy Riggar. This approach creates a modern and playful look without relying on overwhelming patterned tiles or wallpaper. Riggar explains that the blue grout accentuates the pattern of simple white tiles, adding a 'just enough pop of fun' moment that complements the neutral design and draws inspiration from a vintage rug. For the fourth example, And And And Studio's bathroom design utilizes matching yellow tile grout and a painted ceiling to create a continuous and calming 'marigold-drenched' effect. Annie Ritz, Principal Designer at And And And Studio, describes how a custom grout color was developed to match the upper wall and ceiling, creating an illusion of continuity and depth within the space. Finally, the article suggests black grout as an option for those seeking contrast without venturing into vibrant colors. In a design by Ann Sacks, black grout is paired with white tiles and softened by peach walls, resulting in a clean yet relaxing aesthetic. DeeDee Gundberg points out that black and white grout combinations are classic and timeless, and encourages experimenting with patterns like herringbone or basketweave to further accentuate the grout's impact, advising a sample test before final installation, especially for smaller tiles where grout plays a more prominent role. #ColorfulGrout #TileDesign #InteriorDesignTrends #BathroomDesign #KitchenDesign #HomeDecor #DesignElements #RetroDesign #ModernInteriors

Grout cleaning, a task often postponed due to its perceived fiddliness, can significantly enhance the appearance of a room. This guide provides five accessible and cost-effective methods for cleaning grout using common household items. A key tool for these methods is an old toothbrush, which serves as an effective scrubbing implement, eliminating the need for specialized cleaning supplies. Each method focuses on restoring discolored or moldy grout to its original state, highlighting the transformative impact on tiled surfaces. The first method involves a paste made from hydrogen peroxide and bicarb soda. This combination is particularly effective for discolored grout, offering a gentler alternative to chlorine bleach. The recommendation is to mix equal parts of hydrogen peroxide and bicarb soda to create a paste, which is then applied to the grout and scrubbed with a soft-bristle brush. A damp towel is used for wiping the residue, revealing noticeable before-and-after improvements. Hydrogen peroxide is readily available in pharmacies or supermarket first-aid sections. For routine grout maintenance, plain dishwashing liquid, diluted with warm water, proves sufficient. It is applied to the grout, lightly scrubbed, and then rinsed. This simple approach is ideal for regular upkeep. When a more potent solution is required beyond dish soap alone, a paste combining bicarb soda and dishwashing liquid is suggested. This mixture can be placed in a sauce bottle for convenient application directly onto the grout lines. After application, the grout is scrubbed and rinsed. This method offers an economical yet effective way to tackle tougher grime. Another option for discolored grout is oxygen bleach, also known as sodium percarbonate. This product can be bought individually from eco-friendly stores or identified as a primary ingredient in certain oxygen-powered laundry boosters. The suggested application involves mixing two tablespoons of oxygen bleach with two cups of warm water, applying it to the grout, letting it sit for about 10 minutes (or as directed by the product), scrubbing with a soft brush, and then rinsing thoroughly. Finally, vinegar is presented as a cleaning agent for grout, albeit with a crucial caution: it should only be used on sealed or undamaged grout. Applying vinegar directly via a spray bottle and allowing it to sit for 10 minutes before scrubbing and rinsing is the recommended approach. Vinegar can also be combined with water and a small amount of dishwashing detergent to create a general bathroom cleaning spray. It is particularly noted for its effectiveness against mold and mildew, common issues in bathroom environments. #GroutCleaning #HomeHacks #DIYCleaning #HouseholdProducts #CleaningTips #BicarbSoda #HydrogenPeroxide #OxygenBleach #VinegarCleaning

Tash Bradley, director of interior design and head colour specialist at Lick, shares her expert tips on transforming a home through the strategic use of colour. Bradley's passion for interior design and colour theory is deeply rooted, influenced by her mother, an interior designer, and further solidified during her studies at the University of Arts London. Initially pursuing fine art, she pivoted to interior design after a module on colour theory illuminated the profound impact colour has on living spaces. Recognizing a gap in the design world for championing colour, Bradley committed to making it her craft. Her expertise led her to a pivotal role at Lick, a paint brand co-founded by her husband, Sam, and Lucas London. At Lick, Bradley curates a palette of no more than 100 shades, aiming to alleviate "colour paralysis" among consumers who are overwhelmed by excessive choice. Her objective is to educate and empower individuals to confidently embrace colour in their homes, moving beyond the default of neutral tones. Bradley has provided over 5,000 one-to-one consultations and recently authored "Master the Art of Colour," a book designed to disseminate her knowledge to a broader audience. Her key recommendations for incorporating colour into home design include colour-drenching, which involves applying a single paint shade across various surfaces to create a sense of openness by minimizing visual breaks. She also advises experimenting with contrasts, suggesting that dark colours in small spaces can lead the eye to brighter, more expansive areas, making them feel larger. Counterintuitively, Bradley notes that lighter colours are not always brighter due to their reflective nature, which can highlight shadows. She recommends choosing rich, pigmented neutrals for pale shades to absorb light effectively. For those hesitant to use colour boldly, she suggests starting small with elements like painted skirting boards, bedside tables, or colourful headboards. Art is presented as an ideal method for introducing vibrancy, as personal connection to artwork ensures comfort with the colours it brings. Bradley emphasizes the importance of considering the floor in design, recommending large, colourful rugs to significantly alter a room's feel. Finally, she encourages breaking traditional colour rules, advocating for personal preference and courage in selecting colours, exemplified by her appreciation for the pink and green combination. Her approach underscores colour as a universal language that, when used thoughtfully, can deeply influence the ambiance and perception of a home. #HomeTransformation #ColorTheory #InteriorDesign #LickPaint #TashBradley #HomeDecoration #DesignTips #ColorPalettes #RoomRenovations

Color selection is crucial for small spaces, and while white is a common choice for making small bathrooms appear larger, this article encourages exploring beyond neutral shades. Balancing the right amount of color in a small bathroom can be challenging, but it is achievable with careful consideration. The article provides a curated list of paint colors suitable for small powder rooms or primary baths, aiming to help readers find the perfect shade to elevate their compact spaces. This guide is designed to assist both those who prefer crisp whites and those who favor moodier hues like greens or browns in transforming their small bathrooms into stylish, jewel-box-like retreats. The article presents 20 paint color recommendations from various brands, along with specific applications and design inspirations. For instance, 'Light Blue by Farrow & Ball' offers a light and airy feel, reminiscent of silver, ideal for a sophisticated ambiance. 'Waterloo by Sherwin-Williams,' a deep teal blue, is suggested for bathrooms with bold tiles, as it complements and connects with deeper tile shades. For those desiring a subtle dimension without straying far from white, 'Endive by Valspar' provides a vegetal green that harmonizes with antique patinas. 'Pine Cone Brown by Benjamin Moore' demonstrates that darker colors can create a rich, enveloping feel, especially when paired with graphic wallpaper in a cottage setting. Green shades are further explored with 'Cooking Apple Green by Farrow & Ball,' a light and bright option that can be used with tonal wainscoting for a playful yet sophisticated look. For a more feminine touch, 'Cocoa Berry by Sherwin-Williams,' a moody mauve, is recommended for petite powder rooms. Coastal inspirations lead to 'Stiffkey Blue by Farrow & Ball,' which, when combined with 'Swiss Coffee by Sherwin-Williams' and 'Hague Blue by Farrow & Ball,' creates a calming, airy seaside palette in an attic bathroom. Warm whites are represented by 'Westhighland White by Sherwin-Williams,' which is preferred over crisper shades when combined with aged wood tones to create a cozy atmosphere. 'Bunker Hill Green by Benjamin Moore' offers a vibrant grassy green to make an impact in limited spaces, especially when paired with classic white and wood elements. For textured neutrals, 'White Limewash by JH Wall Paints' brings visual interest to V-groove paneled walls. Classic navy is highlighted with 'Newburyport Blue by Benjamin Moore,' providing a timeless and rustic charm, particularly with rough-hewn wood and striped fabrics. A pure and simple white, 'White by Benjamin Moore,' is presented as a timeless choice for farmhouse-style bathrooms. 'Mountain Stream by Sherwin-Williams' is a watery blue perfect for beach houses, drawing inspiration from surrounding natural elements and complementing patterned wallpapers and vintage art. The importance of trim color is underscored with 'Oakmoss Green by Sherwin-Williams,' a mossy green that adds a playful complement to vintage wallpaper in a farmhouse guest bath. For a softer take on dark colors, 'Graphite by Benjamin Moore,' a gray-infused black, is recommended. 'Snowbound by Sherwin-Williams' is a clean white that serves as an ideal backdrop for showcasing colorful collections in homes with rich patina. For bold statements, 'Caribbean Teal by Benjamin Moore' is suggested for wainscoting, providing a modern twist to classically patterned floral wallpapers. Finally, 'White Dove by Benjamin Moore' is another versatile, crisp white that shines when paired with light curtains and colorful mirrors. 'Smoke & Mirrors by Benjamin Moore' offers a creamy gray that suits rustic finishes, with a tip to paint walls and sloped ceilings the same color for a cohesive look. 'Smoky Azurite by Sherwin-Williams' completes the list, a crisp denim blue that harmonizes with saturated blue subway tiles in compact bathrooms. #SmallBathroom #PaintColors #InteriorDesign #HomeDecor #ColorPalette #HomeImprovement #PaintSelection #DesignIdeas

Over time, grout lines between tiles can become discolored, cracked, or damaged, making tiled areas appear old and worn. Regrouting offers an easy and cost-effective solution to refresh the appearance of tiles and prolong their lifespan. This DIY project can typically be completed over a weekend with a few essential tools. The process begins with thorough preparation of the area. All obstructions should be cleared, and surrounding surfaces covered with plastic sheeting to protect them from dust and debris. The tiled surface itself needs to be meticulously cleaned with a mild detergent and water, ensuring it is free from dirt or oils to allow proper adhesion of the new grout. Before proceeding, it is crucial that all surfaces are completely dry. The next step involves carefully removing the old, damaged grout. A grout removal tool or rotary tool is used to scrape out the existing grout, working slowly to prevent damage to the tiles. It is recommended to remove at least 1/8 inch of old grout to ensure proper bonding for the new material. After removal, any debris should be vacuumed, and the surface wiped clean. Once the old grout is removed, the new grout must be prepared. The choice of grout depends on the width of the tile joints: sanded grout is suitable for joints wider than 1/8 inch, while unsanded grout is preferred for narrower joints. The grout should be mixed according to the manufacturer's instructions to achieve a smooth, peanut butter-like consistency. After mixing, it should be allowed to rest for about 10 minutes before being stirred again and applied. Applying the new grout requires precision. Using a grout float, the grout is spread diagonally across the joints, pressed firmly to ensure complete filling of all gaps. It is advisable to work in small sections to prevent the grout from drying prematurely, which could make cleaning excess grout more difficult. After application, excess grout needs to be removed from the tile surfaces. This is done gently with a damp sponge, being careful not to pull grout out of the joints. The sponge should be rinsed frequently, and the wiping continued until the tiles are clean. The grout is then left to set as per the manufacturer's directions. The final step involves curing and sealing the new grout. The grout should be allowed to cure for 24 to 48 hours. Once fully dry, a grout sealer is applied to protect it from moisture, stains, and dirt, a crucial step, particularly in high-moisture areas like bathrooms and kitchens, to maintain the grout's integrity and appearance for years to come. #TileRegrouting #DIYHomeImprovement #BathroomRenovation #KitchenMaintenance #HomeMaintenanceTips #GroutRepair #TileCare