
1/4
Be inspired by this savvy homeowners incredible £50 bedroom wall panelling makeover
Haylie Hammill, a former hospitality worker from Cheltenham and a keen DIY-er, successfully transformed her master bedroom with a wall panelling makeover for less than £50. Inspired by images of wall panelling on Instagram, Haylie, who previously worked in the paint section at B&Q; for four years, leveraged her knowledge of materials and colors to achieve a sophisticated look on a budget. She aimed to give her bedroom character and an expensive appearance without significant expenditure.
The project commenced with Haylie researching materials, ultimately choosing 12mm thick MDF sheets for the panelling. She noted that a thickness between 6mm and 18mm generally works well, but preferred the 12mm for its ability to cast a slight shadow, making the design stand out more. Haylie purchased the MDF from B&Q; and had it cut into 8cm-wide strips, utilizing the store's cutting service. Her tip for others is to visit during less busy times and politely request the service.
For installation, Haylie decided to panel two-thirds up the wall, considering it the most visually attractive height, with the strips approximately 152cm tall. She initially used a timber saw and a mitre box for cutting, though she has since acquired an electric saw for future projects. Before attaching the wood to the wall, she primed the strips with a roller. She then used 'No More Nails' adhesive, emphasizing that it provides about five minutes of repositioning time before setting, and ensured the strips were straight using a spirit level.
To create a shelf effect at the top of the panelling, Haylie incorporated a piece of 27mm pine quadrant moulding for a sloping ledge, and a 5cm-wide strip of MDF on top for additional space for decor. She caulked the edges to eliminate any gaps, ensuring a polished finish. The entire structure was then painted in 'Kyoto,' a blush shade from the B&Q; GoodHome range, using a 1.5-inch paintbrush for edges and a small roller for the areas between the MDF strips. Final touch-ups were done with a fine paintbrush after drying.
The total cost of the project was £47.94, comprising £20 for the MDF, £6.94 for the pine quadrant moulding, £5 for the adhesive, and £16 for the paint. Haylie utilized primer and caulk she already owned, but noted these could be purchased for under £12. The finished bedroom featured pictures, plants, and other accessories on the new panelling shelf. Haylie expressed satisfaction with the outcome, highlighting how the wall panelling looks much more expensive than its actual cost and is an accessible DIY project for beginners.
#BedroomMakeover #DIYProject #WallPanelling #BudgetDecor #HomeImprovement #MDFProjects #InteriorDesign #SavvyHomeowner #BedroomMakeover #DIYProject #WallPanelling #BudgetDecor #HomeImprovement #MDFProjects #InteriorDesign #SavvyHomeowner
0 commenti in totale
Nessun commento ancoraPotresti anche gradire

































































