
1/4
A Pair of Air Jordans Inspired This Tricolor IKEA Shelf Hack
Interior designer Thayná Alves transformed basic white IKEA Lack shelves into a unique decorative feature for a musician's home office. The inspiration for this hack came from a pair of Air Jordan 11s, specifically their round laces, which reminded Alves of hiking rope. The client's office, adorned with Supreme skateboards, a Kaws statue, and vintage Porsche posters, needed a shelving solution that was less conventional than the standard IKEA offering. The initial purpose of the shelves was to conceal old laundry hookups in the wall, and Alves aimed to integrate them more seamlessly with the room's eclectic style.
Alves sourced six different colors of climbing rope from a local REI store, noting that outdoor supply stores often provide a wider variety of colors and thicker materials compared to general hardware stores. The entire modification process for the shelves took approximately one hour. The project involved creating decorative, non-functional brackets using the climbing rope, giving the shelves a distinctive, shoelace-inspired upgrade.
The supplies required for this DIY project include an IKEA Lack shelf, climbing cord, a drill, circular metal rings, two spring links, two cup hooks, hot glue, scissors, and painter’s tape. The first step involves setting up the shelf's original bracket onto the wall studs and attaching the shelf to ensure proper alignment. Two cup hooks are then screwed into the wall above the shelf, from which the spring links are hung. The shelf itself is temporarily removed from its hardware.
The next critical step is to carefully drill four holes, one in each corner, through the shelf. Alves emphasizes caution, as the shelves are primarily made of cardboard and can easily crack if too much pressure is applied. To mitigate this risk, painter’s tape is applied along the long edges of the shelf to provide support during drilling. After drilling, the shelves are reattached to their brackets.
Following this, metal rings are placed around each of the eight drilled openings and secured with hot glue. This step serves to cover the potentially rough edges created by the drilling process, giving the finished product a clean and professional appearance, especially if the MDF chipped during drilling. The final and most intricate step involves weaving the rope through the holes. Given that the interior of the shelf is hollow, a technique is employed to facilitate this: a slice of painter’s tape is shaped into a cone around the end of the climbing cord, providing extra weight and a pointed tip to guide the rope through both holes more easily. A generous amount of cord is pulled through to reach the spring link and feed back through the other set of holes. This process is repeated for both sides of the shelf. The cord is then cut, and the ends are tied off with a single knot, completing the custom shelf hack.
#IKEAHack #DIYHomeDecor #ShelvingSolution #CreativeDesign #InteriorDesign #HomeOffice #RenovationIdeas #CustomFurniture #IKEAHack #DIYHomeDecor #ShelvingSolution #CreativeDesign #InteriorDesign #HomeOffice #RenovationIdeas #CustomFurniture
0 komentarzy łącznie
Brak komentarzy jeszczeMożesz również polubić



































































